MF606-2K Primer Surfacer
3、MF606-2K Primer Surfacer
Automotive Paint company
Product Name/Model:MF606-2K Primer Surfacer
Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling power andfine adhesion between coats, fast drying time, easy sanded.
Substrates |
Dried and sanded existing finishes, all kinds of primer and putty. |
||
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again withdegreaser. |
||
MixingRatio |
MF606-2K Primer Surfacer |
MF106 2K PrimerHardener |
Thinner |
4 |
1 |
1~1.5 |
|
<15℃ |
MF606 2K Primer Surfacer |
MF106 2K PrimerHardener |
60 Fast Thinner |
15-30℃ |
MF606 2K Primer Surfacer |
MF106 2K PrimerHardener |
61 Standard Thinner |
>30℃ |
MF606 2K Primer Surfacer |
MF106 2K PrimerHardener |
63 Slow Thinner |
Pot-Life |
At 20°C, 3 hours mixed with hardener, thinner |
||
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
||
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm ² |
||
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends ontemperature and paint film. |
||
Drying Time |
|
||
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
||
Package |
1L×12or3.75L×4 |
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
Send product request
Other supplier products
BYTF606-2K Primer Surfacer | Auto Coatings Product Name/Model:BYTF606-2K Primer Surfacer Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling pow... | |
MSK-6000 Extra Fast Clear Coat | MSK-6000 Extra Fast Clear Coat Automotive Paints Supplier Product Name/Model:MSK-6000 Extra Fast Clear Coat. Characteristic: Extra fast drying... | |
MSD-0930 2K Binder | MSD-0930 2K Binder Automotive Refinish Paint Product Name/Model:MSD-0930 2K Binder Characteristic:Resin solution used as additive for spraying M... | |
Clear Coat Series | Clear Coat Series Automotive Paints Supplier Product Name/Model:Clear CoatSeries Characteristic:1.MSK-8000Clear Coat:Two- component 880 clear ... | |
BYT Clear Coat Series | BYT Clear Coat Series Auto Coatings Product Name/Model:BYT Clear Coat Series Characteristic:1、 BYT518 Clear Coat :Two- component 518 clear coat wi... |
Same products
Fast Dry Alkyd Antirust Primer (Iron Red, Gray) | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The fast-drying alkyd anti-rust paint is composed of alkyd resin and anti-rust pigments. Its surf... | |
Exterior Wall Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Weather Resistant Acrylic Exterior Latex Wall Paint is a premium quality, water based 100% acryli... | |
DRINKING WATER TANK PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It ... | |
CHEMICAL PLANT PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a c... | |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion re... |