Nylon 66 PA66 Heat Stabilized (A2006X01, A2016X01) for Engineering Plastics
Nylon66 PA66 Heat Stabilized Description
Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6has the properties of low water absorption, excellent heat resistance, good processing fluidity, low expansion coefficient, and high bonding strength with metals.
The advantages of Anmeiheat stabilized nylonare as follows, and it meets the new requirements of new energy vehicles for plastics:
- Comply with relevant regulatory requirements(DPPD-free, no anti-Oxidant Aromatic Amine type additive)
- Long-term heat-resistant stability(Long-term resistance to high temperatures of 190 ° C and 230 ° C, and with high strength)
- Low extractables(Do not block the oil circuit of the capillary structure)
- Electrially Neutral(Do not cause short circuit of the circuit)
- Low warpage
Difference Between Nylon 6 And Nylon 66
PA6GFhas good toughness and is used in climbing hands, automotive structural parts, etc.
PA66has both toughness and hardness, and is used in industrial gears such as marine propellers.
Nylon66 PA66 Heat Stabilized (A2006X01) Typical Application
This type ofpolyamide nylon PA66 is used for spare parts in the automotive field, such as cable ties, pipe clamps, brackets, shells, three-way joints.
As a modified plastics inc, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
Anmei-ABS Engineering Plastic | ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyac... |
 |
Antibacterial Masterbatch | Polymer antibacterial masterbatchis a kind ofmasterbatch materialthat adds antibacterial agents into the carrier resin, which is offering antimicro... |
 |
PA66 GF50(A2011J) for Engineering Plastics | PA66GF 50is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processin... |
 |
Low-shrinkage PBT Masterbatch for Engineering Plastics | Tubes are colored to make the identification process easier in loose tube optical fiber cables. Low-shrinkage PBT masterbatchmaterial as loose tube... |
 |
Transparent ABS (MABS Plastic) for Engineering Plastics | Transparent ABS (MABS Plastic) for Engineering Plastics Transparent ABS, also called MABS plastic material, which has excellent transparency, impa... |
Same products
 |
Thrombite™ Clot Retriever Device | Seller: ZYLOX-TONBRIDGE MEDICAL TECHNOLOGY CO., LTD. | OVERVIEW Thrombite™ Clot Retriever Device HELICAL OPEN-SIDE STRUCTURE HIGHER ACUTE RECAN... |
 |
Market Status Of China's Mold Manufacturing Industry | Seller: Taizhou Huangyan Fow Mould CO., LTD | In recent years, due to the continuous improvement of China's industrialization, China has become... |
 |
Stamping Mold Parts | Seller: Dongguan City Fangling Precision Mould Co., LTD. | Stamping — also called pressing — involves placing flat sheet metal, in either coil o... |
|
|
Nylon 66 PA66 Heat Stabilized (A2006X01, A2016X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Nylon66 PA66 Heat Stabilized Description Nylon66 PA66 Heat Stabilized a high temperature nylon m... |
 |
Furniture UV Coating Machine Line for sale | Seller: Suzhou Kisinhom Machinery Co., Ltd. | The uv coater machinecoats the rolled substrate with a layer of glue, paint or ink with a specifi... |
