Transparent powder coating
WA：+86 132 6275 2056
WEB: std-coatings.com
Introduction
Transparent powder coatings are prepared by mixing carefully selected raw materials, including resins, curing agents, and additives. The resulting transparent powder coatings offer excellent economic and social benefits and have a broad market potential.
Application
Transparent powder coating is suitable as a topcoat for metal objects, providing excellent protection and decorative effects. Examples include metal furniture, hardware, bicycles, door handles, and handicrafts. It is also suitable as a protective topcoat for metallic powder coatings. Furthermore, it is suitable for automotive exterior parts, car wheels, interior and exterior paints, architectural coatings, interior and exterior metal components, and gardening equipment.
Features
| Item | Specification |
|---|---|
| Chemical Type | Epoxy/Polyester or Pure Polyester Type |
| Appearance | Flat |
| Curing Condition (Workpiece Temperature) | 200℃ / 10min; improper curing may cause loss of color, gloss, and coating performance |
| Gloss | Depends on specific product |
| Storage Condition | Sealed and stored in a dry, cool place below 30℃ |
| Shelf Life | 6 months (<30℃), 12 months (<25℃) |
| Packaging Specification | 25kg/carton |
Technical indicators
Note: Substrate and pretreatment: Mechanical performance tests were conducted using 0.6mm thick degreased cold-rolled steel plates; corrosion and aging resistance tests were conducted using 0.6mm thick zinc phosphated steel plates or chromated aluminum plates.
• Film thickness: 60-80μm • Curing conditions: 200℃/10min (workpiece temperature)
| Item | Index | Test Standard |
|---|---|---|
| Bending | Passed, curvature diameter 6mm | ASTM D522 |
| Passed, curvature diameter 4mm | GB/T 1731 | |
| Dry Adhesion | Passed, result 5B | ASTM D3359 |
| Passed, result Grade 0 | ISO 2409 | |
| Cupping Test | Passed, 6mm, no cracking/peeling | ISO1520 |
| Passed, 6mm, no cracking/peeling | GB/T 9753 | |
| Impact Resistance (Direct Impact) | ≥50kg·cm | ASTM D2794 |
| ≥50kg·cm | GB/T 1732 | |
| Pencil Hardness | ≥H | ASTM D3363 |
| ≥H | GB/T 6739 | |
| Chemical Resistance | Good (tested with general acids, alkalis, oils at room temperature) | / |
| Water Mist Resistance | Passed, 1000h, no blistering or loss of gloss | ASTM D1735 |
| Water Immersion Resistance | Passed, 24h, no blistering or loss of gloss | ASTM D870 |
| Neutral Salt Spray | Passed, 250h, no blistering or peeling | ISO 9227 |
Construction Reference
Transparent powder coating can be applied using manual or automatic spraying equipment. For best results, automatic spraying equipment is recommended. Unadhered powder can be recycled through a suitable recovery system.
Atomizing air pressure: ~0.7 bar
Primary air pressure: ~0.7 bar
Recommended voltage: 40~90 kV
Send product request
Other supplier products
 |
Light Blue Sand Texture Powder Coating | Introduction Product Series Sandprint Series Name Light Blue Sand Texture Powder Coating Material Resin, Epoxy Color ligh... |
|
|
Metallic matte MT-019/94027 | Introduction No. MT-019/94027 Color Metallic color Surface Metallic matte System Weather-resistant polyester Sco... |
 |
Villa Elevator Powder Coating | Introduction Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resista... |
 |
Zinc-rich powder coating | Introduction This series of products is based on saturated carboxyl polyester resin and TGIC curing agent as the main base material. It is a the... |
|
|
Electronic & Electrical Powder Coatings | Introduction We are a trusted Chinese powder coating manufacturer with over 20 years of export experience, delivering premium coatings to electric... |
Same products
 |
Powder coatings for automotive interior parts MT-A2201/MT-YN203GF | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YN218GF / | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be u... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I | Seller: Standard International Group (HK) Limited | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof rack... |
 |
Basecoat powder coating MT-A2204/MT-MW188I | Seller: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2204 basecoat comes in an... |
