Gray wrinkle color powder coating
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Introduction
COLORS AVAILABLE
RAL colors coating powder
Pantone colors
Color-matching regarding customer requirement is available
PHYSICAL PROPERTIES
Specific gravity :1.2 ~1.8g/cm3 up to colors
Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
Level of liquidity:24 ~27 mm
CURING CONDITIONS
180 °C ~200 °C (work piece temperature), 10-15 minutes
AVERAGE COVERAGE
8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
Mechanical property |
||
| Testing items | Standards and methods | Inspecting index |
| Impact strength | GB/T1732-1993. AS3715 2.8 | >50kg/cm |
| Bending resistance | GB/T1185-88. AS1580 402.1. ISO9227 | Pass 2-5 millimeters |
| Adhesion CHECKED TEST | GB/T9286-88.2mm Cross cut, ISO2409 | Pass100/100. passes 0levels |
| Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
Chemical resistance and weather resistance |
||
| Salt spray test | GB/T1771-91.500 hours | The cross section of corrosion less than 2MM |
| Hot and damp resistance test | GB/T,1000 hours | Without air bubbles, loses the light slightly |
| Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
| Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
| Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
| Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
| Uvioresistant | QUV-313.500 hours | Gloss higher than 80% lower than the
Munsell color change level |
| Water tolerance of | 2 hours | No bubble, not falling, losing light |
Send product request
Other supplier products
 |
Weather Resistant Polyethylene PE Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview Weather Resistant Polyethylene PE Powder Coating is a thermoplastic polyethylene-bas... |
 |
Metallic flat matte MT-049/96190 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/96190 Color Metallic color Surface Metal... |
 |
Flat matte POWDER COATING MT-049/14900 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/14900 Color White Surface Flat matte System Polyester Scope of ap... |
 |
Powder coating primer containing zinc MT-PZ ALZ90F | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-PZ ALZ90F is azinc-rich epoxy powder primerdesigned to provide enhanced corrosi... |
 |
Metallic flat high gloss MT-049/98102 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98102 Color Metallic color Surface Metal... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
