.

Gray wrinkle color powder coating

Getaquote

whats/app:+86 132 6275 2056

WEB: std-coatings.com

Introduction

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property

Testing items Standards and methods Inspecting index
Impact strength GB/T1732-1993. AS3715 2.8 >50kg/cm
Bending resistance GB/T1185-88. AS1580 402.1. ISO9227 Pass 2-5 millimeters
Adhesion CHECKED TEST GB/T9286-88.2mm Cross cut, ISO2409 Pass100/100. passes 0levels
Cupdrawing:Erichsen, ISO1520 Erichsen, ISO1520 Pass 3-7 millimeters

Chemical resistance and weather resistance

Salt spray test GB/T1771-91.500 hours The cross section of corrosion less than 2MM
Hot and damp resistance test GB/T,1000 hours Without air bubbles, loses the light slightly
Acid resistance 10% CH3COOH, 240 hours Without air bubbles, the surface without damage
Alkali resistance 10% NaOH, 240 hours Without air bubbles, the surface without damage
Heat resistance 200degree,1 hour The color change is lower than E=1.5
Solvent resistance MEK24 hours soaked in solvent-free Without air bubbles, the surface without damage
Uvioresistant QUV-313.500 hours Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of 2 hours No bubble, not falling, losing light


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Functional Material Powder Coatings
Functional Material Powder Coatings 1. Targeted Solutions for Industrial Challenges Functional powder coatings address industry-specific needs where traditional coatings fall short, ...
Light Color Powder Coating
Light Color Powder Coating Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Why Choose Light Color Powder Coatings? Light color powder coatings, including whit...
Epoxy zinc-rich powder
Epoxy zinc-rich powder Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction Accurate selection of powder has always been a problem for the powder ...
Coating for Busbar by Electrostatic Spray Application MT-EL-HLF59R
Coating for Busbar by Electrostatic Spray Application MT-EL-HLF59R WA:+86 132 6275 2056 WEB: std-coatings.com Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation o...
Polyester based powder coating MT-OA010G White
Polyester based powder coating MT-OA010G White Product Description MT-OA010G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI...
供应产品

Same products

Metallic flat high gloss  MT-049/98010
Metallic flat high gloss MT-049/98010 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
Pure epoxy powder coating
Pure epoxy powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
Epoxy polyester powder coating
Epoxy polyester powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
Pure polyester weather-resistant powder coating Factory Supplier
Pure polyester weather-resistant powder coating Factory Supplier 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
Metallic flat semi-gloss Powder Coating  MT-049/97003
Metallic flat semi-gloss Powder Coating MT-049/97003 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...