GlobeCore Transformer Oil Regeneration Plant

• 
• 

The Plant’s design includes Fuller’s Earth reactivation in situ for continuous reuse of Fuller’s Earth. Fuller’s Earth regeneration facility will allow oil processing to be carried out using one set of columns whilst the other set is reactivating. Alternatively oil processing or reactivation could be carried out in all columns.
GlobeCore CMM-R plant comprises degassing and regeneration units. Its design allows for stationary as well as mobile operation when mounted on a roadworthy trailer. Plants vary in the numbers of Fullers Earth columns. GlobeCore plants are available with 6, 12 or 24 columns as required for different flow rates.



The CMM-R plant is fully controlled via a SCADA system from a Laptop, positioned within the operators compartment, and a touchscreen on the control panel. Valve operation is effected via solenoid controlled compressed air. Included on the control system is a manual override mode. During operation, degassing and regeneration units shall be connected to a transformer. Oil is drawn into the degassing unit where it is heated to operational temperature and filtered. Oil is then pumped into the regeneration unit and back to the degasser for the removal of moisture and dissolved gasses. Figure below depicts the schematic arrangement of the CMM-R plant.

Comparing to older technology where Fuller’s Earth is used only once and then must be disposed together with oil and harmful contaminants, GlobeCore CMM-R plants utilize the principle of sorbent (Fullers Earth) reactivation and have a number of unique features:
Extend transformers lifecycle by 25 to 30 years
Regenerate the oil on energized transformer
Remove sludge from cellulose insulation
Reactivate the sorbent (Fuller’s Earth) allowing the sorbent to stay in the plant for 2-3 years before replacement is needed.
Oil regeneration and Fuller’s Earth reactivation is fully automatic.
Disposal of sorbent is environmentally friendly and safe as Fuller’s Earth is free from oil and contaminants.

Other supplier products

	GlobeCore UMBP-22P capacity 22 m3 per hour	UMBP-22P bitumen modification unit is designed for production of modified bitumen, including polymer bitumen binding for preparation of top coat as...
	Globe Core Turbine Oil Purification Plant CMM 4T	GlobeCore CMM 4T – Oil Purifier designed for removal of solid particles and free and dissolved water from industrial oils. Use of Racshig Rings in ...
	Globe Core Transformer Oil Purification Plant CMM 0.6	Removes Water from 100 ppm down to 10 ppm in a single pass and down to 5 ppm after 3 passes (ASTM method D-1533); - Removes Particulate Matter to ...
	Globe Core Transformer Oil Purification Plant CMM (UVM) 4 with High Vacuum	Removes Water from 100 ppm down to 10 ppm and from 50 ppm to 5 ppm in a single pass (ASTM method D-1533) Reduces Gas content from fully saturated w...
	GlobeCore UVB -1 productivity of 1 m3 per hour	UVB-1 bitumen unit is designed for production both anionic and cationic bitumen emulsions, which are used in road construction as follows: base coa...

Same products

	Mongoose MD2/3 Shale Shaker Screen	Seller: Tangshan AngXin Technology Co.,Ltd	Mongoose MD2/3 shale shaker screen fits for Swaco mongoose MD series shale shakers. The material ...
	L series falling sand cooling roller	Seller: Qingdao Sanzhuji Equipment Manufacturing Co.,Ltd.	When the mold of the sand box is rotated to a certain height, it falls to the bottom of the simpl...
	S99 series hanging permanent magnet separator	Seller: Qingdao Sanzhuji Equipment Manufacturing Co.,Ltd.	S99 series permanent magnet separation equipment, using high magnetic material, has strong magnet...
	S95 series permanent magnet separator	Seller: Qingdao Sanzhuji Equipment Manufacturing Co.,Ltd.	This machine adopts a permanent magnet -- permanent magnet block as the magnetic source, the magn...
	FX100 Hydrocyclones	Seller: Tangshan AngXin Technology Co.,Ltd	FX100 hydrocyclone is 4 inch size. It is a spare part for Mud Cleaner and Desilter. Hydrocyclo...