TBBS (NS) CAS 95-31-8 N-tert-butylbenzothiazole-2-sulphenamide
Introduction
Chemical Name:N- tert- butyl- 2- benzothiazole sulfenamide
CAS NO.:95-31-8
Product Specification:
| Appearance | White or light yellow powder/Pastille | |
| Purity（GC）,% | ≥ | 96.0 |
| Melting Point(Initial),°C | ≥ | 104.0 |
| Heat Loss,% | ≤ | 0.40 |
| Ash,% | ≤ | 0.30 |
| Residue on sieve(150μm),% | ≤ | 0.10 |
| Insoluble in methanol,% | ≤ | 1.0 |
| Free amine,% | ≤ | 0.50 |
◆Performance:Siceler TBBS is kind of accelerator with delayed action, excellent scorch resistance, safe processing and rapid curing speed.
◆Application:Siceler TBBS is used as delayed action accelerator for NR, BR, IR, SBR and reclaimed rubber of NR. It is mainly used in the production of rubber products such as tires, rubber shoes, rubber tubes, rubber belt, cables, etc.
◆Packaging:Paper/plastic packages with a net weight of 25kg per package.Or FIBC with a net weight 500kg per package.
◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine, rain and long-term extrusion，keeping away from hot source.
95-31-8 –Physico-chemical Properties
| Molecular Formula | C11H14N2S2 |
| Molar Mass | 238.37 |
| Density | 1,29 g/cm3 |
| Melting Point | 105°C |
| Boling Point | 344.1±25.0 °C(Predicted) |
| Flash Point | 165°C |
| Vapor Presure | 6.72E-05mmHg at 25°C |
| BRN | 158370 |
| pKa | 1.25±0.70(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.5500 (estimate) |
| Physical and Chemical Properties | Chemical properties light yellow brown powder. Soluble in benzene, dichloromethane, carbon tetrachloride, ethyl acetate, acetone, ethanol, soluble in gasoline, insoluble in water. |
| Use | Uses This product is a natural rubber, butadiene rubber, isoprene rubber, styrene butadiene rubber and reclaimed rubber aftereffect accelerator, especially suitable for carbon black rubber with strong alkaline content. It is safe at operating temperature, strong scorch resistance, fast vulcanization speed, high constant elongation strength, and can improve the use ratio of synthetic rubber. Low toxicity and high efficiency, it is an ideal substitute for NOBS, has excellent comprehensive performance, and is called a standard accelerator. Widely used in the production of radial tires. It can be used with aldehydes, guanidines, and thiuram accelerators, and when combined with anti-scorch agent PVI, it forms a good vulcanization system. Mainly used in the manufacture of tires, rubber shoes, rubber hoses, tapes, and cables. |
95-31-8 –Risk and Safety
| Risk Codes | R43 – May cause sensitization by skin contact R53 – May cause long-term adverse effects in the aquatic environment |
| Safety Description | S36 – Wear suitable protective clothing. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S37 – Wear suitable gloves. S24 – Avoid contact with skin. |
| UN IDs | 3077 |
| RTECS | DL6200000 |
| TSCA | Yes |
| HS Code | 29342000 |
| Hazard Class | 9 |
| Packing Group | III |
Send product request
Other supplier products
 |
Rheology modifier STD-9020 | Composition: Polyamide wax dispersion Appearance: light yellow paste Active ingredient: 20% Solvent: Mixed aromatic hydrocarbons Scope of Appli... |
 |
CAS 2421-28-5 | CAS 2421-28-5 Purity / Analysis Method >96.0%(T) Molecular Formula / Molecular Weight C17H6O7= 322.23 Physical State (20 deg.... |
 |
Styrene CAS 100-42-5 | Introduction Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, A... |
 |
Epoxy resins | Introduction to Epoxy Resins Epoxy resins are a class of thermosetting polymers known for their exceptional adhesion, chemical resistance, and mec... |
 |
CAS 101-54-2 4-ADPA 4-Aminodiphenylamine | Introduction CAS Number: 101-54-2 Molecular Formula: C12H12N2 Molecular Weight: 184.24 Appearance: Purple-black solid or flakes Melting Point: 69&... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
