Anionic Flocculants

SINOFLOC anionic flocculantare co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. Our anionic powder polyacrylamideis available in solid powder and emulsion forms.

Anionic Polyacrylamide (anionic PAM) Specifications:

Products	Product Code	Anionic Charge	Molecular Weight
Anionic PAM Powder	SINOFLOC 9012	Slightly	Medium
Anionic PAM Powder	SINOFLOC 9014	Slightly	High
Anionic PAM Powder	SINOFLOC 9116	Low	High
Anionic PAM Powder	SINOFLOC 9118	Low	Very High
Anionic PAM Powder	SINOFLOC 9218	Medium	High
Anionic PAM Powder	SINOFLOC 9219	Medium	High
Anionic PAM Powder	SINOFLOC 9220	Medium	Very High
Anionic PAM Powder	SINOFLOC 9224	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9226	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9318	Medium	High
Anionic PAM Powder	SINOFLOC 9320	Medium	Very High
Anionic PAM Powder	SINOFLOC 9326	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9418	Medium	High
Anionic PAM Powder	SINOFLOC 9426	Medium	Ultra High
Anionic PAM Powder	SINOFLOC 9518	Strongly	High
Anionic PAM Powder	SINOFLOC 9526	Strongly	Ultra High
Anionic PAM Emulsion	SINOFLOC 932	Medium	Very High

Anionic polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.

Products Feeding:

The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.

Other supplier products

	Nonionic Flocculants for Industrial Wastewater Treatment	SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polyacrylamide polymers, in dry powder character. Our products have ...
	Polydadmac	Polydadmac SINOFLOCpolyDADMAC is liquid, cationic coagulants with different solid contents and viscosities and suitable a wide range of PH. Our po...
	Cationic Flocculants for Municipal Wastewater Treatment	Along with the increasing need for water resources, the recycling and reuse of municipal wastewater are essential. Cationic polyacrylamide is effec...
	Cationic Flocculants	Cationic Flocculants SINOFLOC cationic flocculants are co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic gr...
	Superabsorbent for Hygiene Products and Diapers	The using and innovation of superabsorbent polymers revolutionized the diaper and hygiene industry which makes human’s life more comfortable....

供应产品

Same products

	YC160W Wheel excavator YC160W	卖方: Guangxi Yuchai Equipment Technology Co., Ltd	YC160W Wheel excavator YC160W wheel excavator is a new generation of full hydraulic wheel excavat...
	Yuchai U20 mini excavator	卖方: Guangxi Yuchai Equipment Technology Co., Ltd	Yuchai U20 mini excavator Improvements in Over 80 Details: Tailless Excavator U20 is a Yuchai ...
	Yuchai YC80 small excavator	卖方: Guangxi Yuchai Equipment Technology Co., Ltd	Yuchai YC80 small excavator International brand engine It is equipped with Yanmar 4TNV98C natur...
	Top Type Hydraulic Breaker	卖方: Guangxi Yuchai Equipment Technology Co., Ltd	Top Type Hydraulic Breaker With the higher restriction of blasting control,hydraulic breakeris w...
	S35-Electric Skid Steer Loader	卖方: Guangxi Yuchai Equipment Technology Co., Ltd	S35-Electric Skid Steer Loader Yuchai S35 Electric Skid Steer Loaderis compact and flexible, des...