Nylon Non-standard Parts
Nylon Non-standard Parts
Nylon is a tough angular translucent or milky white crystalline resin, as engineering plastics nylon molecular weight is generally 15-30,000. Nylon has high mechanical strength, high softening point, heat resistance, low coefficient of friction, abrasion resistance, self-lubricating, shock absorbing and sound deadening, oil resistance, weak acid resistance, alkali resistance and general solvent resistance, good electrical insulation, self-extinguishing, non-toxic, odorless, good weather resistance, poor dyeing. Nylon non-standard parts are manufactured by the technique of nylon machining .
Features of Nylon CNC
Nylon material is also a common material used in nylon cnc machining. Due to its hardness, toughness and processing characteristics, nylon material plays an irreplaceable role in precision parts machining. When it comes to thin-walled CNC nylon machining parts, there will be easy deformation, precision is also difficult to control, and the workpiece in the clamping, will make the workpiece deformation, after unloading, the workpiece elastic deformation automatically recovers, resulting in the workpiece without force-free conditions of the size and processing size does not match. Trapped for should take vigorous clamping initial processing, and a slight clamping finishing processing sequence, to ensure that the clamping force does not affect the dimensional accuracy of the parts.
Advantages of Nylon CNC Machining
1. Nylon CNC features high mechanical strength, and good toughness, with high tensile and compressive strength. Specific tensile strength is higher than metal, and the compressive strength and metal are not comparable, but it is less rigid than metal. Tensile strength is close to yielding strength, more than twice as high as ABS.
2. With outstanding fatigue resistance, the nylon CNC parts can still maintain the original mechanical strength after repeated bending. Common escalator handrails, new bicycle plastic wheel rims periodic fatigue are often applied PA.
3. High softening point, heat-resistant (such as nylon 46, high crystalline nylon heat deflection temperature, can be used for a long time at 150 degrees. PA66 after glass fiber was reinforced, its heat deflection temperature reached 250 degrees above).
4. Smooth surface, small coefficient of friction, wear-resistant. The nylon machining is self-lubricating when used as movable mechanical components, with low noise, and can be used without lubricant when the friction is not too high.
5. Corrosion resistance, very resistant to alkali and most salt liquids, but also resistant to weak acids, oil, gasoline, aromatic compounds and general solvents, but not resistant to strong acids and oxidizers. The CNC nylon can be used as packaging material for lubricants, fuels, etc.
We are a professional precision machining china manufacturer focusing on OEM & ODM customized services of precision quality machining. We own a precision machining service supplier specializing in precision cnc machining, non-standard spare part processing, metal stamping and metal prototyping.
Other supplier products
|
|
Nylon Non-standard Parts |
Nylon is a tough angular translucent or milky white crystalline resin, as engineering plastics nylon molecular weight is generally 15-30,000. Nylon... |
|
|
POM Non-standard Parts |
Polyacetal ( POM ) properties for crystalline thermoplastic, with an apparent melting point of 165 ~ 175 ℃, the nature of the closest to the metal,... |
|
|
Copper Precision Spare Parts |
T1, T2 copper is mainly used as conductive, heat-conducting and corrosion-resistant components, such as wires, cables, conductive screws, shells an... |
|
|
CNC Machining Parts |
CNC Machining Parts
OEMparts cnc machiningare components produced by CNC (computer numerical control) machining. CNC machining is a manufacturing ... |
|
|
Plastic CNC Machining Parts |
Commonly used materials for plastic parts processing: ABS, POM, PC, PEEK, Bakelite, Nylon, etc. Specifically can be used for 3D printing, rapid pro... |
供应产品
Same products
