C Type Impulse Current Test System with Crowbar
Application
The C type impulse current test systems with crowbar are sophisticatedly designed to generate impulse current of exponential shapes. The system can be designed in various ways for meeting customers’ requirements. The test system is applicable in testing of SPD, lightning protection components (MOV or air gap), lightning rod and aircraft device.
Standard
IEC 61643-1 2011, GB18802.1, GB/T 17626.5
GB/T 16927.2 ,YD／T 1235.1
Advantages and Features
(1) Open structure to expand waveform
(2) High peak current of 10/350s waveform with impulse capacitors of lowest capacitance
(3) With crowbar switch to fulfill the perfect combination of the impulse voltage generator and impulse current generator
(4) With the Yuntai control of 360 degrees of digital surveillance system
(5) Automatic power-off earthing protection
(6) Shape resistors designed for low inductance and connected by easy joint
(7) Specially designed circuit available for different shapes.
(8) Easy operation with the console based on PLC module.
(9) Special solutions to customer’s problem and special requirement
Crowbar circuit
n Automatic adjustment of crowbar three-ball gap driven by the stepper motor
n 300kV impulse voltage generator with 100kV per stage voltage and 0.5μF per stage capacitor
n Waveform steep device
n With triggering time of 0-50μs and resolution of 0.1μs
n Trigger simultaneously with impulse current generator
在线联系供应商
Other supplier products
 |
冲击电压测试设备 | Application GIV series impulse voltage test systems can be used to generate impulse voltages simulating lightning impulse (1.2±30%/50&plu... |
|
|
C Type Impulse Current Test System with Crowbar | Application The C type impulse current test systems with crowbar are sophisticatedly designed to generate impulse current of exponential shapes. Th... |
 |
D type Impulse Current Test System | Application The D type impulse current test systems are specially designed to generate impulse current of exponential shapes. The system can be de... |
 |
Steep Waveform Generator Unit | Application Steep waveform generator units are used to generate the steep wave front waveform. They comprises of one steep waveform generator gap u... |
 |
Multiple Chopping Gap | Application The GTJB multiple chopping gap can be used for chopping of lightning impulse voltages between 20 kV and 3600 kV. The chopping can be... |
Same products
 |
MONSA® DDAC-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
MONSA® CT-35 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: Sodium Methyl Cocoyl Taurate MONSA® CT-35 is mild, anionic co-surfactant, which... |
