underslung segment launching gantry
Underslung Segmental Launching Gantry
Precast Segmental Method with a segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span.
Segmental Launching Gantries are used for erecting Precast Segmental Bridges; for Balance Cantilever Method or Span by Span Method. Launching Gantry can be designed as Under-slung or Overhead Model to meet the site requirements.
Whenever segmental Launching Gantry is use, efficiency is crucial. HUADA Launching Gantries are designed to save every single minute in the construction sequence. Motorized mechanisms are used for continuous self-launching, electric winches with motorized travelling wagons are used for segment lifting and transporting, Spreader Beam with 360° on plane rotating, vertical tilting and angle adjustment functions are provided.
Segmental Launching Gantries are used for erecting Precast Segmental Bridges; for Balance Cantilever Method or Span by Span Method. Launching Gantry can be designed as Under-slung or Overhead Model to meet the site requirements.
Whenever segmental Launching Gantry is use, efficiency is crucial. HUADA Launching Gantries are designed to save every single minute in the construction sequence. Motorized mechanisms are used for continuous self-launching, electric winches with motorized travelling wagons are used for segment lifting and transporting, Spreader Beam with 360° on plane rotating, vertical tilting and angle adjustment functions are provided.
Overhead LG Innovations of HUADA:
◆independent main structures, only connected by the gantry crane, allowing transverse adjustment from single to double and even to triple track.
◆Implementation of hinges on our underslung LG has made it possible to erect spans with a horizontal radius down to 75m.
◆The underslung hydraulic adjustment system permits the whole span to be adjusted in all directions to correct possible misalignments during erection.
◆Underslung LG consist of independent self-supporting main structures combined with advanced lifting equipment, creating an exceptionally flexible system for both the balanced cantilever and the span-by-span method.
◆independent main structures, only connected by the gantry crane, allowing transverse adjustment from single to double and even to triple track.
◆Implementation of hinges on our underslung LG has made it possible to erect spans with a horizontal radius down to 75m.
◆The underslung hydraulic adjustment system permits the whole span to be adjusted in all directions to correct possible misalignments during erection.
◆Underslung LG consist of independent self-supporting main structures combined with advanced lifting equipment, creating an exceptionally flexible system for both the balanced cantilever and the span-by-span method.
Prices vary a lot according to different specifications, please contact for details.
Huada Products
A: Precast Bridge Launching Equipment
1.Beam Launcher
2.Overhead Segmental Launching Gantry
3.Underslung Segmental Launching Gantry
4.Segment Lifter
5.Full Span Launching Gantry
6.Cast in Situ Equipment
7.Overhead Movable Scaffolding System
8.Underslung Movable Scaffolding System
9.Overhead Form Traveller
10.Underslung Form Traveller
B:Casting Yard Equipment
1.Gantry Crane
2.Straddle Carrier
3.Tyre Transporter
4.Mould
C:General Industry Cranes
1.Double Girder Gantry Crane
2.Single Girder Gantry Crane
3.Double Girder Overhead Crane
4.Single Girder Overhead Crane
5.Electric Hoist
D:Port Cranes
1.Marine Hoist
2.Portal Crane
3.Rail Mounted Container Gantry Crane
4.Rubber Tyre Container Gantry Crane
A: Precast Bridge Launching Equipment
1.Beam Launcher
2.Overhead Segmental Launching Gantry
3.Underslung Segmental Launching Gantry
4.Segment Lifter
5.Full Span Launching Gantry
6.Cast in Situ Equipment
7.Overhead Movable Scaffolding System
8.Underslung Movable Scaffolding System
9.Overhead Form Traveller
10.Underslung Form Traveller
B:Casting Yard Equipment
1.Gantry Crane
2.Straddle Carrier
3.Tyre Transporter
4.Mould
C:General Industry Cranes
1.Double Girder Gantry Crane
2.Single Girder Gantry Crane
3.Double Girder Overhead Crane
4.Single Girder Overhead Crane
5.Electric Hoist
D:Port Cranes
1.Marine Hoist
2.Portal Crane
3.Rail Mounted Container Gantry Crane
4.Rubber Tyre Container Gantry Crane
在线联系供应商
Other supplier products
| 优质吊车抓斗销售 | 产品描述 高品质吊车抓斗是一种能开闭抓斗,抓斗内的泥沙及各种散货。它是一种主要依靠左右两个组合斗或多爪开口爬行卸料的摊铺机。 高品质吊车抓斗结构紧凑、造型美观、节能、操作方便、抓斗力大、自动化程度高。是大型矿产品、生铁、废钢、垃圾、铁粉、稻草、矿渣等物料的理想装卸工具。 高品质吊车抓斗,专为单... | |
| 仓库单梁高架起重机轻型起重设备 | 单梁架空机轻型起重设备具有结构合理、整机刚性强等优点,可与电动葫芦配套使用。起重能力1-20t,工位A3-A5,工作温度-25-40C。该起重机可广泛应用于工厂、仓库、货场等不同场所。根据不同用户的需要,给出了地面控制和舱室控制两种工作方式。 LD电动单梁高架起重机规格: 1.容量:1-20t... | |
| 中国供应商钢丝绳卷筒绞车卷筒,价格便宜 | 中国供应商绞车钢丝绳卷筒主要有铸铁卷筒、钢板卷筒两种类型。(有时,对于小直径滚筒,我们采用无缝钢管)。一般来说,铸铁具有自润滑性能,对钢丝绳使用更舒适。而板绳滚筒更适合大直径绳筒。对于大直径滚筒,铸件成形较为复杂,重量较大也是一个问题。 中国供应商绞车用钢丝绳卷筒卷筒一般采用铸铁。特殊用途,可... | |
| 最佳服务推广1600T桁架架桥机架设高速公路主梁 | 产品描述 采用1600T桁架桥发射机架设梁,预制跨度可达60m。它的设计和制造是为了保证高性能、高效率、安全性、灵活性和多次连续使用。 ▪独立支持搬迁系统。 ▪独立的平台处理系统。 ▪维修高架起重机。 ▪所有操作的无线电遥控。 ▪无线电遥控吊具梁用于分段定位。 安全特性 1600T桁架桥架设机... | |
| 非常受欢迎的混凝土800吨下水龙门起重机用于梁的架设价格 | 产品描述 800吨启闭门式起重机 800吨起吊龙门起重机是我公司盛华设计部为高速铁路桥梁施工(250公里/小时,350公里/小时)研制和设计的。龙门起重机最大起重量为800吨。800吨启闭门式起重机具有重量轻、稳定性好、自定位精确、横梁定位精确、操作方便等优点。800吨启闭门式起重机配有集中控... |
Same products
| GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC(6-48工位三导管)氧化镁粉灌装机,是在GT-FM-PLC(6-48工位双导管)的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下: 三导管灌装机可以在一... | |
| High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统:采用工控级电脑控制平台,配套进口伺服电机与减速机,确保运行高效、精准、稳定。 六轴联动结构设计:送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合,实现多工序复合成型。 ... | |
| GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC(6-48工位三导管)氧化镁粉灌装机,是在GT-FM-PLC(6-48工位双导管)的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下: 三导管灌装机可以在一... | |
| 48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度,根据直径、氧化镁粉末、填充速度,密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... | |
| 8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度,根据直径、氧化镁粉末、填充速度,密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |













