IBOP For Top Drive
IBOP for top drive can be divided into Upper IBOP and Lower IBOP, they are control valves which are used with the top drive system. Usually the two valves connected to the top drive drilling device. The IBOP adopts high reliable metal seal. So it can bear high pressure upward and downward. The working pressure can be achieved 10000 psi or 15000 psi. When well kick occurring, the upper IBOP can be closed by remote controlled, but the lower IBOP will be closed manually. Actuator for top drive is a subsidiary body which controls open and close of Upper IBOP. It works with other accessories of the rig, so that control opening and closing of Upper IBOP on any height of derrick driller console. Both the valve body cavity and accessories have special anti-corrosive processing, so that prolong the working life.
Specification ofIBOP For Top Drive
Model |
OD mm(inch) |
ID mm(inch) |
OAL mm(inch) |
Conn. |
STJ03M |
187(7 23/64) |
78(3 5/64) |
572(22 33/64) |
6 5/8REG BOX &BOX |
STJ03J |
187(7 23/64) |
78(3 5/64) |
523(20 19/32) |
6 5/8REG BOX &PIN |
DQFP187-3C |
187(7 23/64) |
76.2(3) |
572(22 33/64) |
6 5/8REG BOX &BOX |
DQFP187-4 |
187(7 23/64) |
76.2(3) |
523(20 19/32) |
6 5/8REG BOX &PIN |
DQFP187-9 |
187(7 23/64) |
78 (3 5/64) |
523(20 19/32) |
6 5/8REG BOX &PIN |
DQFP187-10 |
187(7 23/64) |
78 (3 5/64) |
572(22 33/64) |
6 5/8REG BOX &PIN |
DQFP190-1 |
190(7 31/64) |
76.2(3) |
547(21 17/32) |
6 5/8REG BOX &PIN |
DQFP196-1 |
195.8(7 45/64) |
78 (3 5/64) |
572(22 33/64) |
6 5/8REG BOX &BOX |
DQFP196-2 |
195.8(7 45/64) |
78 (3 5/64) |
523(20 19/32) |
6 5/8REG BOX &PIN |
DQFP197-5C |
197(7 3/4) |
76.2(3) |
572(22 33/64) |
6 5/8REG BOX &BOX |
DQFP197-6B |
197(7 3/4) |
76.2(3) |
536(21 7/64) |
6 5/8REG BOX &PIN |
DQFP197-3 |
197(7 3/4) |
78 (3 5/64) |
584(23) |
6 5/8REG BOX &PIN |
DQFP197-4 |
197(7 3/4) |
78 (3 5/64) |
512(20 5/32) |
6 5/8REG BOX &PIN |
DQFP200-2 |
200(7 7/8) |
76.2(3) |
547(21 11/32) |
6 5/8REG BOX &PIN |
DQFP216-1 |
216(8 1/2) |
78 (3 5/64) |
600(23 5/8) |
6 5/8REG BOX &PIN |
DQFP216-2 |
216(8 1/2) |
78 (3 5/64) |
533(20 63/64) |
6 5/8REG BOX &PIN |
DQFP216-4 |
216(8 1/2) |
76.2(3) |
603(23 47/64) |
6 5/8REG BOX &PIN |
SDX254-3 |
254(10) |
105(4 9/64) |
596(23 15/32) |
6 5/8REG BOX &PIN |
WEB:
COMPANY:XI'AN SCOTON OILFIELD EQUIPMENT CO., LTD
TEL:
在线联系供应商
Other supplier products
Multi-cycle Circulating Subs | Description of Multi-cycle Circulating Subs The multi-cycle circulating subis the company's own research and development of new products,The multi... | |
Decanter Centrifuge | LW series decanting centrifuge is the fourth class solids control equipment in well drilling solids control. Using decanter principle to separate s... | |
Reamer Shoe | Reamer shoes overcome wellbore obstructions and guide the casing or liner to total depth.Our reamer shoe designs use an eccentric guide nose to n... | |
IBOP For Top Drive | IBOP for top drive can be divided into Upper IBOP and Lower IBOP, they are control valves which are used with the top drive system. Usually the two... | |
Marine Casing Cutter | Description of Marine Casing Cutter Marine Casing cutter is one of tools which cuts the casing internally. It uses water horsepower to drive cutte... |
Same products
LBH Dust Seal Fits Excavator | 卖方: Guangzhou Sanping Machinery Co., Ltd. | LHBSealFits Excavator Temperature ℃: -20/+200 Material: Viton Seal LBHMedium: high-tempera... | |
DKB Dust Seal Fits Excavator | 卖方: Guangzhou Sanping Machinery Co., Ltd. | Dust Seal DKBFits Excavator As one of important mechanical machine parts, DKB outer iron shell o... | |
Sanping Dust Seal | 卖方: Guangzhou Sanping Machinery Co., Ltd. | Sanping Dust Seal The dust ring can remove dust and debris on the surface of the piston rod, but... | |
MPI Rod Seal Fits Excavator | 卖方: Guangzhou Sanping Machinery Co., Ltd. | MPI Rod Seal Fits Excavator MPI seals, a type of custom oil seals, are widely used in constructi... | |
BRT Back Up Ring Fits Excavator | 卖方: Guangzhou Sanping Machinery Co., Ltd. | BRT PTFE Back Up RingsFits Excavator BRT type PTFE+copper powder material Seal ring back support... |