Waste water treatment by air oxidation

Wet catalytic oxidation, the standard abbreviation CWO, refers to raising the temperature of wastewater to 180 ℃ - 325 ℃, using the oxygen in the air to increase the solubility with the increase of pressure. Under the action of catalyst, oxygen molecules and organics in wastewater undergo a rapid oxidation reaction, resulting in ring breaking and chain breaking of organics, which are collectively referred to as degradation.

The principle of degradation reaction is free radical chain reaction. The primary products of oxidative degradation are simple organic acids and organic alcohols below C4. Some of the degradation products will be deeply degraded and mineralized into carbon dioxide to form the removal of TOC. The degradation rule is that the higher the reaction temperature is, the greater the proportion of deep degradation to carbon dioxide is.The catalytic strength can reduce the energy level of degradation reaction and increase the speed of degradation reaction. The top of wet catalytic oxidation process is supercritical oxidation.

Medium temperature and medium pressure wet catalytic oxidation is a kind of wet catalytic oxidation. It refers to the process of wet catalytic air oxidation in the temperature range of 180 ℃ - 258 ℃ and the corresponding pressure range of 2.5mpa-5.0mpa.

A large number of engineering practices have proved that: wet catalytic oxidation in the middle temperature and middle pressure section can obtain good degradation effect and appropriate COD removal effect, supplemented by other low-cost sewage degradation means, can obtain the best economy (investment, operation, life).

Technical Featuresof

1. The maximum inlet temperature of medium temperature and medium pressure system shall not exceed 258 ℃, and the maximum operating pressure shall not exceed 5.0mpa. The pressure control is very stable, the service life of the equipment is long, and the failure rate is low.
2. Under the operation condition of medium temperature and medium pressure system, the system has relatively small supplementary heat and low pressure, and the operation power consumption of air compressor is low. The main operating cost of wet oxygen process comes from air compressor and hot oil furnace. Therefore, the operating cost of medium temperature and medium pressure system is generally reduced by about 50% compared with that of high temperature and high pressure wet oxygen system.
3. The system adopts our unique long-term fixed bed catalysis, namely heterogeneous catalysis system. Its advantage is that no heavy metal ions (commonly used homogeneous catalytic materials) are added into the tower materials to avoid secondary pollution caused by heavy metals and reduce the cost of operation catalysis.

More information please via:

Other supplier products

	Formic acid production technology	Formic acid production technology Agent Technology and Plants Technical Features: Methanol CarbonylationSynthesis of Formic Acid from Methyl For...
	Anhydrous formaldehyde plant	SL TEC has close to ten years experience in based on silver contact process(or silver catalyzed process). A lower methanol consumption, higher for...
	Hydrogen Peroxide Manufacturing Plant	There are several methods for, among them theAO(auto-oxidation) processis the most prevailing one. In this process, 2-alkyl anthraquinone is mixed...
	PPC Plant	is acompletely biodegradable environment-friendly plastic synthesized from carbon dioxide and propylene oxide. Besides, due to its using the main...
	ECH production process by glycerin method	ECH production process by glycerin method Product Description Epichlorohydrin is the main raw material for the production of epoxy resin. It is a...

供应产品

Same products

	Wax injection	卖方: Yihui casting Technology Co., Ltd.	Wax injection This category mainly includes the MAXWAX brand wax injection machinesdeveloped and...
	Moulding tools	卖方: Yihui casting Technology Co., Ltd.	Moulding tools Casting supplies a complete range of jewellery moulding tools designed for profes...
	Moulding machines	卖方: Yihui casting Technology Co., Ltd.	Moulding machines YihuiCasting provides advanced mold making equipments for jewelry designed for...
	3D printer	卖方: Yihui casting Technology Co., Ltd.	3D printer YihuiCasting provides advanced 3d jewelry printers designed for modern jewelry produc...
	3D Design	卖方: Yihui casting Technology Co., Ltd.	3D Design This category includes all 3D printers and relevant spare parts like release films, re...