Waste water treatment by air oxidation

• 

Wet catalytic oxidation, the standard abbreviation CWO, refers to raising the temperature of wastewater to 180 ℃ - 325 ℃, using the oxygen in the air to increase the solubility with the increase of pressure. Under the action of catalyst, oxygen molecules and organics in wastewater undergo a rapid oxidation reaction, resulting in ring breaking and chain breaking of organics, which are collectively referred to as degradation.

The principle of degradation reaction is free radical chain reaction. The primary products of oxidative degradation are simple organic acids and organic alcohols below C4. Some of the degradation products will be deeply degraded and mineralized into carbon dioxide to form the removal of TOC. The degradation rule is that the higher the reaction temperature is, the greater the proportion of deep degradation to carbon dioxide is.The catalytic strength can reduce the energy level of degradation reaction and increase the speed of degradation reaction. The top of wet catalytic oxidation process is supercritical oxidation.

Medium temperature and medium pressure wet catalytic oxidation is a kind of wet catalytic oxidation. It refers to the process of wet catalytic air oxidation in the temperature range of 180 ℃ - 258 ℃ and the corresponding pressure range of 2.5mpa-5.0mpa.

A large number of engineering practices have proved that: wet catalytic oxidation in the middle temperature and middle pressure section can obtain good degradation effect and appropriate COD removal effect, supplemented by other low-cost sewage degradation means, can obtain the best economy (investment, operation, life).

Technical Featuresof

1. The maximum inlet temperature of medium temperature and medium pressure system shall not exceed 258 ℃, and the maximum operating pressure shall not exceed 5.0mpa. The pressure control is very stable, the service life of the equipment is long, and the failure rate is low.
2. Under the operation condition of medium temperature and medium pressure system, the system has relatively small supplementary heat and low pressure, and the operation power consumption of air compressor is low. The main operating cost of wet oxygen process comes from air compressor and hot oil furnace. Therefore, the operating cost of medium temperature and medium pressure system is generally reduced by about 50% compared with that of high temperature and high pressure wet oxygen system.
3. The system adopts our unique long-term fixed bed catalysis, namely heterogeneous catalysis system. Its advantage is that no heavy metal ions (commonly used homogeneous catalytic materials) are added into the tower materials to avoid secondary pollution caused by heavy metals and reduce the cost of operation catalysis.

More information please via:

Другие товары поставщика

	Acetic Acid Plant	Acetic Acid Plant Proprietary Technology and Plants SL TEC has 15 years experience in acetic acid industry from technology R&D, plant design, e...
	Methylal Refining Technology China	Air Separation Packing Air Separation Unit (ASU) Packing Air Separation Packing Air Separation Packing Technology Distillation Technolo...
	модификатор ударопрочности ПВХ акриловый	is mainly used to improve the impact properties and processability of PVC. PVC is important among general plastics. It has high strength, low pri...
	Methylal Refining Technology China	Methylal Refining Technology Proprietary Technology and Plants Technical Features: Methaldehyde has excellent physical and chemical properties, ...
	Fixed Bed Process Hydrogen Peroxide Plant	Fixed Bed Process Hydrogen PeroxidePlant Product Description There are several methods for hydrogen peroxide production and manufacturing, among ...

Похожие товары

	Китайская машина для обжатия с горячим каналом GT-JYH12 (с ЧПУ)	Продавец: Чжаосин-гуретт технолоджис лимитед	Описание Машина для обжатия с горячим каналом GT-JYH12 предназначена преимущественно для обжат...
	Китайская машина для обжатия труб GT-JY18 на 18 позиций	Продавец: Чжаосин-гуретт технолоджис лимитед	Описание Машина для обжатия трубчатых нагревателей GT-JY18 (18 позиций) является популярной мо...
	Multiple Blades Digital Label Cutter VR350	Продавец: WILLIAM CNC TECHNOLOGY	Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq...
	Digital Label Die Cutting Machine VR240X	Продавец: WILLIAM CNC TECHNOLOGY	Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th...
	Rotary die cutting machine VR320	Продавец: WILLIAM CNC TECHNOLOGY	Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ...