TTC400A Cable Tool Setter Unit
Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradually focused its main business on developing CNC touch probe and touch probe. its production, and sales.We developed probes, tool setters, and a variety of probe styluses of the three series of products. As the touch probein the field of CNC machine tool probe in China, Pioneer has always persisted in independent development pioneer machine and tool and worked hard to reach the world advanced level.
TTC400A lathe tool setterunit is a product specially developed by our company for replacing some vulnerable tool setting units that is part of the swing-arm for setting the cutting tool in the CNC lathes. It is suitable for various specifications of CNC lathe, turning machine center and CNC milling -turning center.
Parameter of TTC400A Cable Tool Setter Unit
|
TTC400A： |
|
|
Measuring direction |
±X, ±Z,±5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Diameter of the four ceramic touching pillar |
|
|
Hardness of the touch face |
|
|
Input voltage |
24±10% VDC |
|
Output load current |
50 mA |
|
Seal grade |
IP68 |
Drawing of TTC400A Cable Tool Setter Unit
TTC400A Cable Tool Setter UnitTTC400A Cable Tool Setter Unit
Application of TTC400A Cable Tool Setter Unit
TTC400A used with a high-precision motorized tool setting arm, which can realize in-sequence tool setting and tool breakage detection without operator intervention.
For tool measuring and broken tool detection on 2-axis and 3-axis CNC lathes.
Replacement of some vulnerable tool setting units.
Technical Characteristics of TTC400A Cable Tool Setter Unit
As shown in the picture, the installing structure and size of the tool setter unit are exactly the same as the replacement;
Tool setter unit transmits tool setting signal through cable;
It is ensured during manufacturing that the position relationship between four pillars of the tool setter unit and mounting base;
One LED indicator light is used to display the tool setter’s working state.
Signal model and LED instruction: high electric level output with normal signal state, LED normally on; When any one pillar is triggered, the signal output point is suspended and the LED is off;
在线联系供应商
Other supplier products
 |
CNC Machine Tool Touch Probe System | CNC Machine Tool Touch ProbeSystem Pioneer touch probes for CNC machines can measure and find the base position of the workpiece quickly and acc... |
 |
TTC400A Cable Tool Setter Unit | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the probe factoryg... |
 |
EP40 Electrical Probe | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
TP400 Cable Probe | TP400cable probe system mainly used in various specifications of CNC grinding machines, CNC lathes, and especially measuring devices. TP400 CNC dig... |
 |
Radio Probe System | The radio communication probe systemis suitable for various complex working conditions in the processing of CNC machine tools, mainly suitable for ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
