.

Waterborne Acrylic Coating

The waterborne acrylic coatingsis composed of acrylic emulsion, pigments, etc. The water-based acrylic topcoat is a one-component coating with water as the diluent, and the paint film has good gloss and excellent performance.

Water-based acrylic topcoat is mainly used in mild to moderate industrial corrosive environments, such as corrosion protection and appearance decoration of steel structures, mechanical equipment, vehicles, buildings, pipelines, petrochemicals, guardrails and other facilities. It has excellent protective properties.

Advantages of Water based acrylic coating

Diluted with water and nonflammable;

Good rust resistance and excellent waterproof performance;

Good adhesion to bare steel and shop primer, and quick drying;

Compatible with the existing waterborne coatings or solvent-based coatings

Specification of Waterborne AcrylicCoating

Type

water based

Solid Content

55%

Mixing Ratio

One component

Dry Film Thickness

30μm per coat

Specific Gravity

Coverage Rate (Theoretical)

Drying Time

Temperature

10℃

20℃

30℃

Dry to touch

60mins

30mins

20mins

Dry Hard

6hrs

4hrs

3hrs

Package

20kgs bucket

JINHAI, as an excellent coating paint manufacturer, offers a wide range of industrial paint coatingfor you to choose from.


在线联系供应商

至: Tianjin Jinhai Special Coatings & Decoration Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

FUXI ® ACRYLIC PAINT
FUXI ® ACRYLIC PAINT Acrylic resin has high hardness, full coating film, good heat resistance, water resistance, solvent resistance, chemical resistance, and good weath...
Non-Carbon Epoxy Antistatic Anticorrosive Intermediate Paint
Non-Carbon Epoxy Antistatic Anticorrosive Intermediate Paint Non-carbon epoxy antistatic anticorrosive intermediate paintis two-component. It has high electrical conductivity and good physical properties, wit...
Underwater Curing Epoxy Coating
Underwater Curing Epoxy Coating Underwater Curing EpoxyCoating Underwater paintare two-component, formulated with special resins, extender pigments, fillers and curing agents. It...
Chlorinated Rubber Anticorrosive Primer (Iron Red)
Chlorinated Rubber Anticorrosive Primer (Iron Red) Chlorinated Rubber Anticorrosive Primer (Iron Red) Chlorinated rubber anticorrosive primer is combined with a chlorinated rubber resin, curing age...
FUXI ® ZINC-RICH PAINT
FUXI ® ZINC-RICH PAINT Zinc powder is the most important electrochemical antirust pigment. A primer made with a large amount of zinc powder is called a zinc-rich primer. ...
供应产品

Same products

GT-FM24-PLC填粉机机(3+9+9+3)三导管
GT-FM24-PLC填粉机机(3+9+9+3)三导管 卖方: 肇庆古雷特科技有限公司 * 描述 GT-FM-PLC(6-48工位三导管)氧化镁粉灌装机,是在GT-FM-PLC(6-48工位双导管)的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下: 三导管灌装机可以在一...
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing 卖方: Eurion Automation Co., Ltd. 高精度伺服控制系统:采用工控级电脑控制平台,配套进口伺服电机与减速机,确保运行高效、精准、稳定。 六轴联动结构设计:送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合,实现多工序复合成型。 ...
GT-FM18-PLC灌装机(8+2+8)三导管
GT-FM18-PLC灌装机(8+2+8)三导管 卖方: 肇庆古雷特科技有限公司 * 描述 GT-FM-PLC(6-48工位三导管)氧化镁粉灌装机,是在GT-FM-PLC(6-48工位双导管)的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下: 三导管灌装机可以在一...
48工位填粉机 GT-FM48
48工位填粉机 GT-FM48 卖方: 肇庆古雷特科技有限公司 * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度,根据直径、氧化镁粉末、填充速度,密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机...
8工位填粉机 GT-FM8
8工位填粉机 GT-FM8 卖方: 肇庆古雷特科技有限公司 * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度,根据直径、氧化镁粉末、填充速度,密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装...