Spray booth HC900

Specification(European design)Outside size: 7010 x 5570 x 3810 mm (L x W x H) Inside size: 6900 x 4000 x 2800 mm (L x W x H) Foundation and floor Foundation Full metal foundation, full grids, the grids are suppressive type of steel grating instead of traditional twisted steel for the cross bar steel grating. The biggest features for it are beautiful, durable and better force bearing. Surface area of foundation 27 M²(full galvanized grids) Metal basement 350mm height, the ventilation effect is better than traditional spray booth. Drive-in ramps 3 big drive-in ramps, each size: 2000x1030mm, diamond plate structure. Wall and door Wallboard and roof panel High quality double construction fireproof insulation rock wool panel, thickness: 50mm 3-folded entrance door with safety glass window 1set,size: 3200x2700 mm(B x H), size is bigger than traditional spray booth. Operator’s door with safety glass window 800x2000mm(B x H)the top of service door installs door closer to close the door automatically Lighting Ceiling lighting 8units,each 4 x 36 W, total 1152w , adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach IP54 grade. Side lighting 8units,each 2 x 36 W, total 576w, adopt Germany OSRAM Lamp, grade of lighting box’s dustproof and waterproof reach IP54 grade. Brightness ≥1000 LUX Filtration system Pre-filters EU3 grade pocket filter system, filtration effect is much better Ceiling filter EU5 grade high efficient filter Bottom filter and exhaust filter Fibreglass paint-stop filter Ventilation system Inlet fan (Direct drive motor) Adopt big impeller turbo fan, 7.5KW,380V,50HZ Outlet fan(Direct drive motor) Adopt big impeller turbo fan, 5.5KW,380V,50HZ Painting and baking exchange system Solenoid valve+ pressure adjustment control cylinder driven damper exchange Total fan capacity 25.000m³/h Air flow speed in cabin 0.23m/s in empty booth, 0.25-0.35m/s in loaded booth Heating system Heating exchanger material Adopt high efficient heat-resistant stainless steel as cycling heat exchanger Heating exchanger capacity 200KW(260.000Kcal/H) Burner model Adopt Italy REILLO two-ranges diesel burner RG5D(260.000kcal/H), quicker heating and much better effect, more rest assure for quality Heating time 3-5 minutes( from 20°C to 60°C) under baking status, the max baking temperature is 80°C Control board Control system Standard Y/Δ step-down start control system PLC controller Yes, PLC control, more reliable and lower breakdown rate Human-computer interface touching screen control Yes, touching screen control, easier to operate Pressure testing The pressure gauge indicate the pressure inside cabin Function Painting, warm painting, baking, emergency stop switch, alarm indication, failure indication, over-temperature alarm indication, baking delay stop protection


在线询价

至: HC coating equipment manufacturing Co., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Spray booth HC
Spray booth HC Specification(European design) Outside size:(mm) 7110 x 5800x 3810(L x W x H) Inside size:(mm) 7000 x 4000 x 2800(L x W x H) Foundation and floor ...
Spray booth HC900
Spray booth HC900 Specification(European design) Outside size: 7010 x 5570 x 3810 mm (L x W x H) Inside size: 6900 x 4000 x 2800 mm (L x W x H) Foundation and floor...
Spray booth HC660
Spray booth HC660 Specification (European Design) Outside Size:(mm) 7110 x 5800x 3810(L x W x H) Inside Size:(mm) 7000 x 4000 x 2800(L x W x H) Foundation and Floo...
Spray booth HC630-1
Spray booth HC630-1 Specification(European design) Outside Size:(mm) 7010 x 5570 x 3810 mm (L x W x H) Inside Size(mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation an...
Spray booth HC
Spray booth HC Specification(European design) Outside size: 7110 x 5570 x 3810 mm (L x W x H) Inside size:(mm) 7000 x 4000 x 2800 mm (L x W x H) Foundation and f...
供应产品

Same products

decanter centrifuge
decanter centrifuge 卖方: Luhai Energy Co.,Ltd
膜 包机 卖方: sales engineer 工作电源根据您的需求工作压力0.6〜为0.8Mpa机器尺寸14340×1100×2100毫米速度1-12pcs/分钟封切温度190℃〜230℃收缩温度200℃〜280℃材...
玉石抛光打蜡-水磨机
玉石抛光打蜡-水磨机 卖方: 东泰超声波宝石机械有限公司 水磨机主要用于宝石表面打磨抛光使用,适用于大型石料表面抛光。
滑撑自动组装机
滑撑自动组装机 卖方: 深圳市泽宇智能工业科技有限公司 机器参数: 型号:YJ-ZY11-01 产能: 10-15pcs/min 电源: AC380V 50Hz 气压: 0.5-0.8Mpa 重量: ...
底座自动攻牙机
底座自动攻牙机 卖方: 深圳市泽宇智能工业科技有限公司 型号:C01-ZY03-01 产能: 20-25pcs/min 电源: AC380V 50Hz 气压: 0.5-0.8Mpa 重量: 1000KG 尺寸:1200*...