Spray booth HC620

Specification(European design) Outside Size: (mm) 7010 x 5570 x 3610 mm (L x W x H) Inside Size: (mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation and Floor Foundation Full metal foundation, two rows flat steel grids and three rows metal non-slip diamond plates, the grids are suppressive type of steel grating instead of traditional twisted steel for the cross bar steel grating. The biggest features for it are beautiful, durable and better force bearing. Surface area of foundation 10M²(area of grids) Metal basement 350mm height, the ventilation effect is better than traditional spray booth Drive-in Ramps 2 units, each size: 2000x500 mm, diamond plate construction Wall and door Wallboard and Roof Panel Side wall panels adopt high quality double construction fireproof EPS insulation materials, thickness is 50mm, have function of fireproof and keeping warm. Roof panels adopt galvanized steel plate bending forming 3-Folded Entrance Door With Safety Glass Window 1 set, size: 3200x2700 mm(B x H), size is bigger than traditional spray booth -Operator’s Door With Safety Glass Window Big opening:800x2000mm (B x H),hand-made, tempering glass observation windowLight System Ceiling Lighting 8units, each4×36w, total 1152W , grade of lighting box’s dustproof and waterproof reach IP54 grade. Side Lighting No, optional Brightness ≥700 LUX Filtration System Pre-filters Grade G2 plate type fiber glass filter Ceiling Filters EU5 grade high efficient filter Bottom filter & exhaust filter Fibreglass paint-stop filter Ventilation System Inlet fan (Direct drive motor) Adopt big impeller turbo fan, 7.5KW, 380V , 50HZ, CE Outlet fan (Direct drive motor) No Painting and baking exchange system Solenoid valve+ pressure adjustment control cylinder driven damper exchange Fan Capacity 25,000m³/h Air Flow Speed 0.23 m/s in empty booth, 0.25-0.35m/s in loaded booth Heating System Heating Exchanger Adopt high efficient heat-resistant stainless steel as cycling heat exchanger HeatingExchange Capacity 160KW (180,000Kcal/H) Burner Model Adopt Italy RIELLO diesel burner G20(180,000kcal/H) Heating time 4-6 minutes (from 20 to 60ºС) under baking status, max baking temperature is 80°C Control Board Control system Standard Y/Δstep-down start control system Function Painting, warm painting, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication


在线询价

至: HC coating equipment manufacturing Co., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Spray booth HC
Spray booth HC Specification(European design) Outside size:(mm) 7110 x 5800x 3810(L x W x H) Inside size:(mm) 7000 x 4000 x 2800(L x W x H) Foundation and floor ...
Spray booth HC660
Spray booth HC660 Specification (European Design) Outside Size:(mm) 7110 x 5800x 3810(L x W x H) Inside Size:(mm) 7000 x 4000 x 2800(L x W x H) Foundation and Floo...
Spray booth HC
Spray booth HC Specification(European design) Outside size: 7110 x 5570 x 3810 mm (L x W x H) Inside size:(mm) 7000 x 4000 x 2800 mm (L x W x H) Foundation and f...
Spray booth HC650 Specification(European design) Outside Size:(mm) 7110 x 5570 x 3810 mm (L x W x H) Inside Size:(mm) 7000 x 4000 x 2800 mm (L x W x H) Basement Ba...
Spray booth HC630-1
Spray booth HC630-1 Specification(European design) Outside Size:(mm) 7010 x 5570 x 3810 mm (L x W x H) Inside Size(mm) 6900 x 4000 x 2800 mm (L x W x H) Foundation an...
供应产品

Same products

decanter centrifuge
decanter centrifuge 卖方: Luhai Energy Co.,Ltd
膜 包机 卖方: sales engineer 工作电源根据您的需求工作压力0.6〜为0.8Mpa机器尺寸14340×1100×2100毫米速度1-12pcs/分钟封切温度190℃〜230℃收缩温度200℃〜280℃材...
玉石抛光打蜡-水磨机
玉石抛光打蜡-水磨机 卖方: 东泰超声波宝石机械有限公司 水磨机主要用于宝石表面打磨抛光使用,适用于大型石料表面抛光。
滑撑自动组装机
滑撑自动组装机 卖方: 深圳市泽宇智能工业科技有限公司 机器参数: 型号:YJ-ZY11-01 产能: 10-15pcs/min 电源: AC380V 50Hz 气压: 0.5-0.8Mpa 重量: ...
底座自动攻牙机
底座自动攻牙机 卖方: 深圳市泽宇智能工业科技有限公司 型号:C01-ZY03-01 产能: 20-25pcs/min 电源: AC380V 50Hz 气压: 0.5-0.8Mpa 重量: 1000KG 尺寸:1200*...