Dywer Series PE & TE Orifice Plate Flowmeters

Welcome to purchase discount source dywer series pe & te orifice plate flowmeters from our company, which is one of the best China dywer series pe & te orifice plate flowmeters manufacturers and suppliers.The Series PE Orifice Plate Flowmeter offers one-piece PVC construction incorporating a unique holder or carrier ring containing metering taps and integral gaskets. Unlike a standard orifice plate, the Series PE is a true primary element including the various components for differential pressure measurement. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. The Series PE is available in line sizes from 1/2" to 24" and used for air and most gases. It meets or exceeds ASME, AGA & ISO standards.The Series TE Orifice Plate Flowmeter offers one-piece PTFE construction similar to the OP and PE Series orifice plates, which incorporate a unique holder or carrier ring containing metering taps and integral gaskets. Available for line sizes from 1/2" to 24", the Series TE orifice plate can be used with gases, liquids, corrosive, and high temperature fluids. The Series TE can be easily installed by slipping the unit between standard flanges (orifice flanges are not required). The Series TE was designed for use anywhere there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness.Product Applications•    Fluid flow rates in building water lines•    Boiler feedwater•    Cooling water•    Combustion or compressed air•    Steam flowSpecificationsService:   PE:   Clean air and compatible gases; TE: Compatible gases and liquids.Wetted Material:Monolithic (single piece) constructed   entirely of gray PVC for PE or white PTPE for TE, Buna-N gaskets.Accuracy:±0.6% full scale flow. (Beta= .2-.6) ±0.7%   for Beta greater than .6.Temperature Limits:   PE:   140°F (60°C) max; TE: -40 to 200°F (-40 to 93.3°C).Pressure         Limits:150 psi (10 bar) maxHead Loss:1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51%   of the d.p.Line Sizes:   1/2"   to 24".Process Connections:   1/4"   female NPT.Installation:Standard flange 125#/150# rating.Pipe Requirements:General requirements 10 diameter upstream and   5 diameter downstream.Weight:Varies   with line size. See Catalog page.


在线询价

至: Shaanxi wantong automation equipment Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

供应产品

Same products

IC697CMM742 Programmable Control Products TCP/IP Ethernet Communications for the Series 90 PLC
IC697CMM742 Programmable Control Products TCP/IP Ethernet Communications for the Series 90 PLC 卖方: N.S.E. Automation Co.,Ltd IC697CMM742 Programmable Control Products TCP/IP Ethernet Communications for the Series 90 PLC IC...
GE FANUC IC697PWR711 Power Supply Module, 100W, 120/240 VAC or 125 VDC
GE FANUC IC697PWR711 Power Supply Module, 100W, 120/240 VAC or 125 VDC 卖方: N.S.E. Automation Co.,Ltd GE FANUC IC697PWR711 Power Supply Module, 100W, 120/240 VAC or 125 VDC GE FANUC IC697PWR711 Power...
GE FANUCIC697CPX772 96 MHz 32-Bit Point 512 Kbyte (Slow) Memory Central Processing Unit
GE FANUCIC697CPX772 96 MHz 32-Bit Point 512 Kbyte (Slow) Memory Central Processing Unit 卖方: N.S.E. Automation Co.,Ltd GE FANUCIC697CPX772 96 MHz 32-Bit Point 512 Kbyte (Slow) Memory Central Processing Unit GE FANUCI...
GE FANUC IC697BEM731 Series 90-70 Genius I/O Bus Controller
GE FANUC IC697BEM731 Series 90-70 Genius I/O Bus Controller 卖方: N.S.E. Automation Co.,Ltd GE FANUC IC697BEM731 Series 90-70 Genius I/O Bus Controller GE FANUC IC697BEM731 Series 90-70 Gen...
GE FANUC IC698CHS117 RX7i 17Slot Rack Front Mount NEW AND ORIGINAL FOR WARRANTY
GE FANUC IC698CHS117 RX7i 17Slot Rack Front Mount NEW AND ORIGINAL FOR WARRANTY 卖方: N.S.E. Automation Co.,Ltd GE FANUC IC698CHS117 RX7i 17Slot Rack Front Mount NEW AND ORIGINAL FOR WARRANTY GE FANUC IC698CHS...