Kaneko 2-way solenoid valve - M20 series
Product description
A solenoid valve Ni-po, in one place each valve, inlet and outlet piping is used ON the road, as the valve OFF.
Therefore, most products that use fluid pressure is generally low, less liquid 1.5MPa, 0.99MPa in the gas used in the following because it is used to directly control a liquid such as water, oil, chemicals, and gases such as air and gas is.
However, in our company, depending on the caliber, such as the type of fluid, there is also a production performance of the solenoid valve that can open and close the pressure more than 10MPa.
Series
M20 SERIES
M22 SERIES
M30 SERIES
Tweet
Feature
Mass flow rate can be obtained even in a small size. (Cv value:Up to 12.6)
Mounting orientation freedom. (360 ℃)
Precautions
For pilot-operated, should be able to ensure minimum operating differential pressure 0.05MPa or more times.
Standard specification
Fluid
Such as water, oil, air, inert gas
Working pressure
Gas 0.05～0.9MPa
Liquid0.05～1.6MPa
Differential pressure actuated
0.05MPa or more full-time
Fluid temperature
－20℃～60℃
Ambient temperature
－20℃～60℃(That the fluid does not freeze but)
Electrical ratings
Continuity
The allowable voltage fluctuation rate
＋10％，－15％
Current value
Following Table
在线联系供应商
Other supplier products
 |
Kaneko manual reset solenoid valve -M51 SERIES | Feature A kind of safety valve capable of preventing malfunctioning. Being a semi-automatic type, the... |
 |
Kaneko 4-way solenoid valve (SINGLE) -MT16G SERIES | Feature MT16G series solenoid valve is a four-way pilot solenoid valve. It is used to drive the hydra... |
 |
Fischer Contact Pressure Gauge DA08D8A040UB-600PA S1199VA00BK 0-10BAR MS1108VA00BK0000 0-16BAR 24V 0.4A Building technology 16 bar DS31，50 mbar | DS35， DE25, DE28, DE38, DE44,DE45, DE46,DE50, DE61 | MS1199VA00BK 0-10BAR MS1108VA00BK0000 0-16BAR 24V 0.4A Specifications General Measuring range Nominal pressure Max. pressure Perm. ambient temperat... |
 |
Dynisco pressure transmitter Injection Molding | Dynisco pressure transmitter Injection Molding PT4654XL (1% 4-20 mA)Features and Benefits • Adjustable zero and span • Accuracy better th... |
 |
Huba Differential pressure transmitter | The type 401 pressure transmitter, with its unique proven ceramic lever technology, hasadjusted, temperature-compensated sensor signals,The differe... |
Same products
 |
Low-E Braided Packing, Flexible Graphite, Fiberglass, Custom | 卖方: Magpie Valve Packing Gasket Co., Ltd | The Low Emission Braided Packing Manufacturer delivers high-performance flexible graphite valve p... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 窑坎 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ●... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 流道 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ●... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 观察孔 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ... |
 |
电熔锆刚玉砖 | 卖方: 内蒙古亿升新材料有限公司 | AZS-33 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部... |
