Self Adhesive PTFE Sheet
Self Adhesive PTFE Sheet
PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethylene products.
PTFE nai sodium polytetrafluoroethylene nai sodium surface treatment processing Teflon sodium bonding, PTFE -PTFE nai sodium surface treatment, PTFE tetrafluoroethylene surface is not adhesive, to metal or other substances must be bonded after sodium treatment, after treatment with rubber, metal, plastic, wood, non-metal and other substances bonding. Sodium method - mainly through corrosion liquid and PTFE tetrafluoroborate, strip, film surface chemical reaction, pull off part of the fluorine molecules on the surface, this is left on the surface carbonization layer and some polar groups, so as to get activated tetra fluoro fluoride, tetrafluoroPTFE after sodium increase its polarity and surface tension, PTFE tetra fluoro fluoride surface after sodium coffee color.
Specification of Adhesive Backed PTFE Sheet
|
Product name |
Specification(mm) |
|||
|
Square plate(length) |
Circular plate(diameter) |
Thickness |
||
|
PTFE molded plate |
Molded plate |
≦ 800 |
≦800 |
1-50 |
|
Big molded plate |
1000̶ 1600 |
1000-1800 |
3-30 |
|
|
PTFE skived sheet |
Skived sheet |
Width of cloth ≦600 |
||
|
Big skived sheet |
Width of cloth: 600-1500 |
|||
|
Note: Specific size is available as per customer's requirement |
||||
PTFE sheet with adhesiveis divided into 2 kinds: molded sheet and skiving sheet.PTFEplasticmoulded sheet is made of suspension resin by moulding and sintering.PTFE skiving sheet is turned with an embryo which is formed by moulding or hydraulic pressing.
The Technical Indexes of Self Adhesive PTFE Sheet
|
Product name |
The implementation of standards |
The technical performance index |
Remarks |
||||
|
The proportion of |
(Mpa) Tensile strength |
(%)Crack elongation |
(KV/mm) |
||||
|
Witstanding voltage |
|||||||
|
Molded sheet |
Oridinary type |
ZGB33002 SFB-1 & SFB-2 |
≥15 |
≥150 |
SFB-1≥10 |
||
|
Bridge use |
JT/T901-2014 |
≥30 |
≥300 |
||||
|
Skived sheet |
ZBG 33002 SFB-1 & SFB-2 |
≥15 |
≥150 |
SFB-1≥10 |
|||
Feature of Self Adhensive PTFE Sheet
Heat resistance
can work stably from -180℃ to +260℃.
Stickiness
After surface treatment, etched PTFE can be glued to other materials, such as rubber, metal, plastic, etc.
Good mechanical property
No deformation, low friction coefficient.
High Lubrication
Lower friction coefficient in solid material.
If you want to know more kinds of ptfe product, please visit our website.
在线联系供应商
Other supplier products
 |
PTFE Products | As one of the professional PTFE products manufacturers, Jiangsu Xinrui Plastic Technology specializes in manufacturing polytetrafluoroethylene prod... |
 |
Bronze Filled PTFE Products | Bronze filled ptfe rodand bronze filled ptfe sheetproducts are composite materials consisting of bronze particles combined with polytetrafluoroethy... |
 |
PTFE Molded Tube | PTFE Molded Tube PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presinter... |
 |
PTFE Slide Plate | A PTFE slide plateis a specialized component used in structural and mechanical applications. It consists of a flat plate made of polytetrafluoroeth... |
 |
PTFE Molded Rods | In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection... |
Same products
 |
Two-Shot Injection Molds | 卖方: WIT MOLD LIMITED | Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject... |
 |
precision injection molding | 卖方: WIT MOLD LIMITED | precision injection molding Precision injection moldingis a method demanding unparalleled accura... |
 |
Custom Plastic Molds molding | 卖方: WIT MOLD LIMITED | Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part... |
 |
Negative Pressure Physiotherapy Tank Molds | 卖方: Zhuozhou Yihua Mould Factory | The negative pressure tank is a disposable consumable for male negative pressure treatment. This ... |
 |
PLC Casing Molds | 卖方: Zhuozhou Yihua Mould Factory | The PLC housingbelongs to a kind of rail electrical module. It not only needs to achieve the fit ... |
