PTFE Molded Tube
PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. It has many excellent features.
PTFE molded partshave corrosive medium fluid piping, insulating sheathing and drive shaft packing. Conveying high temperature corrosive gas, liquid, which is other pipelines can not be replaced. It can be used to connect graphite, ceramic or glass pipes with lower machinery, to be used as feed and discharge pipes for tank cars, storage tanks, containers or reaction kettle, to carry out pipe dislocation connection or to balance pipe displacement and size change caused by climate or other reasons, or to eliminate high-frequency mechanical vibration. In special occasions can also be used as tubular reactor or heat exchanger.
Specification of PTFE Molded Tube
|
Product name |
Speciations(mm) |
Remarks |
||
|
Diameter |
Length |
|||
|
PTFE pipe |
Molded tube |
Outer: 20-600 |
100-250 |
|
|
Hydraulic tube |
Outer: 50-300 |
500-1000 |
Diameter needs machine processing |
|
|
Extruded tube |
Outer: 30-200 |
<2000 |
the length can be customized as customer's requirement |
|
The Technical Indexes of PTFE Molded Tube
|
Properties |
The implementation of standards |
The technical performance index |
Remarks |
||
|
The proportion of |
Tensile strength(Mpa) |
Crack elongation(%) |
|||
|
Molded rods |
ZBG33003 SFB-1 |
≥14 |
≥140 |
QB/T 3626-1999 Light industry standard |
|
|
Molded pipe |
Company standard |
≥15 |
≥150 |
||
|
Hydraulic rod/tube |
Company standard |
≥14 |
≥150 |
||
|
Extrusion rods/tube |
Company standard |
≥15 |
≥150 |
||
Note: If the customer has special requirements for performance indicators, the parties shall decide through negotiation.
Usage of PTFE Molded Tube
Can be processed into a variety of seals, gaskets.
Electrical insulation electrical equipment parts.
Can also make a variety of chemical anti-corrosion, high temperature resistance or anti-stick parts or products.
We can offer sorts of industrial plastic productfor sale, if you have needs to buy polytetrafluoroethylene products, please leave us a message.
在线联系供应商
Other supplier products
 |
PTFE Corrugated Tube | The process is to make PTFE thin-walled tube at a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all t... |
|
|
PTFE Molded Tube | PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin ... |
 |
PTFE Molded Rods | In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection... |
 |
PTFE Slide Bearing Plate | PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease gr... |
 |
PTFE Extruded Tube | Extruded PTFE tubeis frequently employed when a uniform wall thickness is required throughout the entire length of the tube. The polytetrafluoroeth... |
Same products
 |
Keyboard Mould | 卖方: Green Vitality Industry Co., Limited | Mainly electronic molds we make are electronic housing mold, electronic components mold, electron... |
 |
Industrial Plastic Injection Mold | 卖方: Green Vitality Industry Co., Limited | Plastic Mould Industry The industrial plastic injection moldis replacing metal products in many ... |
 |
Home Appliance Mould | 卖方: Green Vitality Industry Co., Limited | GV Mold has rich experience in home appliance molds (such as television, refrigerators, fans, was... |
 |
Game Controller Mold | 卖方: Green Vitality Industry Co., Limited | To increase the production efficiency, we need optimize the mold cooling system to shorten the cy... |
 |
Filter and Flow Limiting Apparatus | 卖方: Green Vitality Industry Co., Limited | The family mold is used to produce injection parts for liquid filtration and flow monitoring an... |
