1,2-Bis(3-methylphenoxy)ethane CAS 54914-85-1
CAS:54914-85-1,
54914-85-1 – Names and Identifiers
| Name | 1,2-Bis-(3-methyl-phenoxy)ethane |
| Synonyms | F-203(EGTE) 1,2-Bis-(m-tolyloxy)-ethane 1,2-Bis(3-methylphenoxy)ethane 3,3′-(Ethylenebisoxy)bistoluene 1,2-Bis(3-Methylphenyloxy)ethane 1,2-Bis-(3-methyl-phenoxy)ethane Ethylene Glycol Di(m-tolyl) Ether 1,2-Bis(3-methylphenoxy)ethane(EGTE) Ethylene glycol M-tolyl ether (EGTE) 1,1′-[1,2-ethanediylbis(oxy)]bis[3-methyl-benzen 1,1′-[ethane-1,2-diylbis(oxy)]bis(3-methylbenzene) |
| CAS | 54914-85-1 |
| EINECS | 402-730-9 |
| InChI | InChI=1/C16H18O2/c/h3-8,11-12H,9-10H2,1-2H3 |
54914-85-1 – Physico-chemical Properties
| Molecular Formula | C16H18O2 |
| Molar Mass | 242.31 |
| Density | 1.049±0.06 g/cm3(Predicted) |
| Melting Point | 96.0 to 100.0 °C |
| Boling Point | 381.8±30.0 °C(Predicted) |
| Flash Point | 152°C |
| Vapor Presure | 0.001-0.004Pa at 25-45.5℃ |
| Appearance | Solid:particulate/powder |
| Color | White to Light yellow |
| Refractive Index | 1.549 |
54914-85-1 – Risk and Safety
| Hazard Symbols | N – Dangerous for the environment |
| Risk Codes | 50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 3077 9/PG III |
| Hazard Class | 9 |
| Packing Group | III |
在线联系供应商
Other supplier products
 |
CAS 149-30-4 MBT (M) 2- Mercaptobenzothiazole | Introduction Chemical Name:2- Mercaptobenzothiazole CAS NO.:149-30-4Product Specification: Appearance Offwhite to yellowish powder P... |
 |
Silicone fluid（MT6000 ） | Introduction PRODUCT DESCRIPTION MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid. APPLICATIONS • Therm... |
 |
Adhesive for optical communication | Introduction In the field of fiber optic assembly industry, our product line includes single/two-component epoxy based adhesives, UV cured acrylic... |
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
CAS 865-48-5 | Sodium-t-butoxide CAS 865-48-5 Purity / Analysis Method >98.0%(T) Molecular Formula / Molecular Weight C4H9NaO= 96.10 Physica... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
