Ultra-High Purity Neon
Product Details
Product Name
Ultra-High Purity Neon
Neon
Purity
Ultra-High Purity Neon: ≥99.9995%
Neon: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-High Purity Neon | Neon |
|---|---|---|
| Hydrogen (H₂) | ≤1 | ≤2 |
| Helium (He) | ≤5 | ≤6 |
| Oxygen (O₂) + Argon (Ar) | ≤0.5 | ≤1 |
| Nitrogen (N₂) | ≤1 | ≤2 |
| Hydrocarbons (CH₄) | ≤0.5 | ≤1 |
| Water (H₂O) | ≤0.8 | ≤1.5 |
| Total Impurity Content | ≤9.5 | ≤13.5 |
Packaging
Filled in 40L steel cylinders, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial use, used for filling electronic tubes, neon lights, sodium vapor lamps, and as a liquefied cryogenic source, etc.
Physical and Chemical Properties
CAS Number: 7440-01-9.
Physical and Chemical Characteristics: Colorless and odorless inert gas. Slightly soluble in water. Melting point (℃): -248.7; Boiling point (℃): -245.9; Relative density (water=1): 0.07 (-252℃); Relative density (air=1): 0.07; Saturation vapor pressure (kPa): 13.33 (-257.9℃); Flash point (℃): No data; Combustion heat (kJ/mol): 241; Critical temperature (℃): -240; Critical pressure (MPa): 1.30; Upper Explosion Limit (v%): 75; Lower Explosion Limit (v%): 4.1; Ignition temperature (℃): 500–571.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Inert gas, at high concentrations, can reduce oxygen partial pressure in the air, posing a risk of asphyxiation. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
在线联系供应商
Other supplier products
 |
Mixed Gases | Mixed gases, also known as gas mixtures, are combinations of two or more different gases. These mixtures are engineered to meet specific requiremen... |
 |
Brown Series Powder Coating | Introduction We supply a full range of brown powder coatings—from classic chocolate brown to elegant bronze—direct from our factory in... |
 |
Functional Powder Coatings for Industry | Introduction Our Functional Powder Coatings go beyond aesthetics—built to endure harsh environments, resist damage, and meet specific techni... |
|
|
Metallic flat matte MT-629/94737 | Introduction No. MT-629/94737 Color Metallic gray Surface Metallic flat matte System Super weather-resistant polyeste... |
 |
STD-6622 Dispersing Additive | Technical Specifications ParameterDetails Composition Modified acrylic copolymer Appearance Translucent, low-viscosity liquid ... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
