EE pure epoxy powder coating

Product description

Made with epoxy resin as the main raw material, it has excellent chemical resistance and mechanical properties.

Application areas:

Suitable for coating metal products with high requirements for corrosion resistance, electrical insulation and flexibility. It is generally not recommended to be used directly for surface coating of various outdoor products.

Physical properties:

1. Specific gravity: 1.2-1.8 (depending on color and gloss)

2. Storage: Below 25℃, in a dry environment, it can be stored for 6 months if the packaging is intact.

3. Packaging: 15 kg/box, carton packaging, lined with two layers of polyethylene inner bags.

Coating performance:

Spraying area	8-12 m2/Kg, film thickness 70μm (100% powder usage rate)
Adhesion	GB/T 9286	Grade 0
Impact	GB/T 1732	50cm
Cupping test	GB/T 9753	≥ 6 mm
Bending test	GB/T 6742	≤ 3 mm
Pencil hardness	GB/ 6739	≥ H
Salt spray test	GB/T 1771	1000 h passed
Moisture and heat resistance	GB/T 1740	1000 h passed

Application instructions:

Surface treatment: Treat according to the substrate and required performance

Spraying: electrostatic gun or friction gun

Film thickness: 60-70 um

Curing conditions: Workpiece temperature/time: 140-200℃ x 15 minutes (depending on the specific product)

Health and safety:

This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.

Safety and Protection

All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes, wash immediately with clean water and seek medical attention in time. Avoid the deposition of dust and powder particles on the surface and dead corners. Tiny organic particles will ignite and explode under static electricity. All equipment must be grounded to prevent static electricity.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Other supplier products

	EP hybrid powder coating	Product description It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the prod...
	Metallic flat semi-gloss MT-049/96010	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/96010 Color Metallic color Surface Metal...
	High-Purity Methane	WA：+86 132 6275 2056 WEB: std-coatings.com Product Details Product Names High-Purity Methane Pure Methane Methane (CH₄) Purity High-Purit...
	IT industry powder coating	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Brief description: Made of TGIC polyester, epoxy polyester mixed type, etc. as base mat...
	Transparent powder coating	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com MT-MY1843 Transparent yellow MT-MY1842 Transparent red MT-MY1835 Transparent red with...

供应产品

Same products

	5.4,4'-Oxydiphenol CAS 1965-09-9	卖方: Yufeng International Group Co., Ltd	Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-...
	1,1,2,2-Tetrachloroethane CAS 79-34-5	卖方: Yufeng International Group Co., Ltd	Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te...
	3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9	卖方: Yufeng International Group Co., Ltd	Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,...
	2.1,1,2-Trichloroethane CAS 79-00-5	卖方: Yufeng International Group Co., Ltd	Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-...
	1.1,1,2,2-Tetrachloroethane CAS 79-34-5	卖方: Yufeng International Group Co., Ltd	Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te...