.

Electrostatic spray paint Red Polyester powder coating

Properties

highly decorative ripple-pattern finishes.

available in any of powder chemistry types e.g. epoxy, polyester , epoxy polyester and polyurethane .

High ability to hide substrate defects.

Application Schedule

Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV.

Curing schedule : 180-200ºC /10-15 minutes depending on the powder chemistry.

Optimal film thickness : 80 -110 um.

The size of wrinkle pattern obtained depends on the coating thickness.

Excessively thin or thick films will not give a satisfactory finish.

Average Coverage

8-10m³/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating).

Storage Requirements

Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

Health and Safety

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.

Specifications

Chemistry PropertyInspection StandardsTest Indicators (High light)Test Indicators (Glazed/Matte/Low light)
Impact resistance ISO 6272. GB/T 1732-1993 50kg/cm 40kg/cm
Cupping test ISO 1520. GB/T 9753-1988 8mm 7mm
The adhesion (grid method) ISO 2409. GB/T 9286-1998 0 0
Bending ISO 1519. GB/T 6742-1986 2mm 3mm
Pencil Hardness ASTM D3363. GB/T 6739-1996 1H-2H 1H-2H
Salt spray test ISO 7253. GB/T 1771-1991 >500 hours >500 hours
Damp heat test ISO 6270. GB/T 1740-1979 >1000 hours >1000 hours
Heat resistance 110℃/24 hours (white) Good gloss retention, ΔE≤0.3-0.4 Good gloss retention, ΔE≤0.3-0.4
Florida weathering exposure ISO 2810. South 45°, 12 months Gloss retention≥50% Gloss retention≥50%
Artificial accelerated aging 60℃/8 hours + 50℃/4 hours condensing, cycle for 500 hours Gloss retention≥50%, Color stability: ΔE≤0.35 Gloss retention≥50%, Color stability: ΔE≤0.35
Annotate 1. The above experiment uses 0.8mm steel with degreasing and rust removal, and the coating thickness is 50–70 microns.2. The above coating performance may be lower for glossy and slightly lower gloss finishes.

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Polyurethane Powder Coating Solutions
Polyurethane Powder Coating Solutions Introduction We are a leading China-based manufacturer, specializing in polyurethane powder coatings for global B2B customers. With factory-direct...
Dark Gray Silver Powder Coating
Dark Gray Silver Powder Coating Introduction Dark Gray Silver Powder Coating is a decorative and protective coating designed for metal surfaces requiring a metallic appearance an...
Titanium dioxide STD-9300
Titanium dioxide STD-9300 STD-9300 is Alumina, Zirconia and organic treated rutile pigment which produced by sulphate process. It is designed to give optimum properties over...
Insulating Polytetrafluoroethylene (PTFE) Powder Coating
Insulating Polytetrafluoroethylene (PTFE) Powder Coating We manufacture and export a complete range of Polytetrafluoroethylene (PTFE) coatings directly from China, serving industrial B2B clients across el...
Dimethicone High Viscosity Oils Element14 PDMS 60K
Dimethicone High Viscosity Oils Element14 PDMS 60K Product Description Element14 PDMS High Viscosity Oils are linear polydimethylsiloxane polymers with kinematic viscosities of 5000,10000,12500, 30...
供应产品

Same products

High Concentration Plastic Color Masterbatch Factory Direct Supply
High Concentration Plastic Color Masterbatch Factory Direct Supply 卖方: 861445 We are a professional color masterbatch manufacturer with years of R&D experience in plastic ...
Acid Ink Blue G Factory
Acid Ink Blue G Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ...
Acid Black ATT Factory
Acid Black ATT Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o...
Acid Black 10B Factory
Acid Black 10B Factory 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri...
Sulphur Dyes
Sulphur Dyes 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ...