.

RAL6005/6018 green Polyester Powder coating

Application Schedule:

Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV.

Curing schedule : 180-200ºC /10-15 minutes depending on the powder chemistry.

Optimal film thickness :

80 -110 um

The size of wrinkle pattern obtained depends on the coating thickness.

Excessively thin or thick films will not give a satisfactory finish.

Average Coverage:

7-10m³/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating).

Storage Requirements:

Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

Health and Safety:

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.

Coating Performance:

Chemistry PropertyInspection StandardsTest Indicators (High light)Test Indicators (Glazed/Matte/Low light)
Impact resistance ISO 6272, GB/T 1732-1993 50kg/cm 40kg/cm
Cupping test ISO 1520, GB/T 9753-1988 8mm 7mm
The adhesion (grid method) ISO 2409, GB/T 9286-1998 0 0
Bending ISO 1519, GB/T 6742-1986 2mm 3mm
Pencil Hardness ASTM D3363, GB/T 6739-1996 1H-2H 1H-2H
Salt spray test ISO 7253, GB/T 1771-1991 >500 hours >500 hours
Damp heat test ISO 6270, GB/T 1740-1979 >1000 hours >1000 hours
Heat resistance 110℃/24 hours (white) Good gloss retention, ΔE≤0.3-0.4 Good gloss retention, ΔE≤0.3-0.4
Florida weathering exposure ISO 2810, South 45°, 12 months Gloss retention≥50% Gloss retention≥50%
Artificial accelerated aging 60℃/8 hours + 50℃/4 hours condensing, cycle for 500 hours Gloss retention≥50%, Color stability: ΔE≤0.35 Gloss retention≥50%, Color stability: ΔE≤0.35
Annotate 1. The above experiment uses 0.8mm steel with degreasing and rust removal, and the coating thickness is 50–70 microns.2. The above coating performance may be lower for glossy and slightly lower gloss finishes. —

Types of powder coating

Powder coatings can be categorized by resin system (epoxy, polyester, hybrid, polyurethane), appearance (smooth, texture, hammer, metallic, pearlescent), or performance level (anti-corrosion, heat-resistant, UV-resistant, architectural grade, automotive grade).


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Soft Coral Gold powder coating
Soft Coral Gold powder coating Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...
Curtain-textured powder coatings
Curtain-textured powder coatings Introduction Curtain-textured powder coatings are a unique type of finish that creates a distinctive, vertical stripe pattern resembling the appea...
Methyl Isoamyl Ketone MIAK
Methyl Isoamyl Ketone MIAK Applications .Autooem .Autorefinish . Generalindustrial coatings . Paints&coatings . Processsolvents Key Attributes . Excellent solventa...
Fitness Equipment Powder
Fitness Equipment Powder It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and good corrosio...
Steel pipeline powder coating
Steel pipeline powder coating Surface Finish Options Overview Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances...
供应产品

Same products

Heat Sealing Sterilization Pouch
Heat Sealing Sterilization Pouch 卖方: Hopeway AMD Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ...
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier 卖方: Trucont LLC Trucont LLC 持续供应催化转化器废料,可立即装运发货。我们为全球各地的回收公司、金属加工商、汽车回收商、废料贸易商和买家提供优质的催化转化器废料。我们的催化转化器废料经过精心收集、分类...
Epimedium Extract
Epimedium Extract 卖方: Fruit Powder,Vegetable Powder Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
Pumpkin Powder
Pumpkin Powder 卖方: Fruit Powder,Vegetable Powder Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
Broccoli Powder
Broccoli Powder 卖方: Fruit Powder,Vegetable Powder Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...