Spine Bookbinding Hot Melt Adhesive
Spine Bookbinding Hot Melt Adhesive
Hot Melt Adhesive
CHARACTERISTICS
Excellent fluidity and adhesion
Low odor
Low VOC
FIELDS OF APPLICATION
Book binding in spine.Suits for coated paper ≤70g and un-coated paper(offset paper, woodfree paper, writing paper,etc.)
Air Filter Hot Melt AdhesiveTECHNICAL DATA
|
Properties |
Specifications |
Test Methods |
|
Main ingredients |
EVA,resin,etc. |
|
|
Color |
Milky white |
|
|
Form |
Granule |
|
|
Softening point |
≥82℃ |
GB/T15332-1994 |
|
Peeling strength |
≥55N/2.5cm |
GB/T2790-1995 |
|
Viscosity |
2500±500mPa·s(180℃） |
HG/T3660-1999 |
|
Open time |
5~7 s |
HG/T3716-2003 |
PACKAGING
25kgs/kraft bag
APPLICATION METHOD
Application temperature 155±5℃, environment temperature 17~30℃;
Pre-melt the glue at least 2 hours, ensure the glue melts completely and temperature of glue reaches application temperature
Raking depth 1.5mm±0.5mm, slotting depth 1.5mm±0.5mm, slotting interval 5.0~7.0mm;
INSTRUCTIONS FOR USE
The fluidity and setting time changes along with the temperature of working shop, please adjust the temperature of melting tank and speed of binding machine;
Glue should be used separately;
Suggested working humidity at RH50%±10%;
Clean up premelter every season and clean up melter every two weeks.
Books should be stored at 0~40℃, shall not be stored outdoors and heat source.
SHELF LIFE AND STORAGE CONDITIONS
Shall be stored in indoor, cool and dry place, avoid direct sunlight and constant high temperature
2 years (sealed)
REMARK
These shown data is based on our knowledge and experience. This also applies to any third party property rights. Customers must check that the products are suitable for their processes and usage.
More information you can view here
在线联系供应商
Other supplier products
 |
Hot Melt Glue for Automobile | Hot Melt Glue for Automobile Hot Melt Adhesive CHARACTERISTICS Odorless under room temperature, less odor and VOCs at high temperature Good bonding... |
 |
Printshop Use Hot Melt Adhesive | Printshop Use Hot Melt Adhesive Hot Melt Adhesive CHARACTERISTICS Good flowability and bonding strength Less odor, less VOCs FIELDS OF APPLICATION ... |
 |
Hot Melt Adhesive for Box Making | Hot Melt Adhesive for Box Making Hot Melt Adhesive CHARACTERISTICS Easy to spray, good initial tack and bonding strength Short open time, medium se... |
 |
Printing Ink for Offset Printing Machine | Vacuum Soy Printing Ink Soy Based Offset Ink Offset Printing Ink, Printing Ink for Offset Printing Machine Vacuum Soy Printing Ink Code:SNS-G Cyan ... |
 |
Offset Printing Process Ink 4 Colors | Offset Printing Process Ink 4 Colors Soy Based Offset Ink Offset Printing Ink Code: SNS Black Application: Suitable for printing on coated and whi... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
Cover Tape | 卖方: Zhuhai Tongxi Electronics Technology Co., Ltd | Cover tapeis a strip material used for SMD packaging of electronic products, often used in conjun... |
 |
Acrylic Design Artwork Cutting | 卖方: Beijing KangDa ShengXin Acrylic Products Co., Ltd | Acrylic Design Artwork Cutting PRODUCT DESCRIPTION We specialize in custom acrylic high process... |
