Scott Flex Tester
Product Introduction:
Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials.
One end of the sample is fixed in the left fixture, the other end is fixed in the right fixture, with a certain stroke and number of times, and the appropriate pressure, the two samples are bent to each other, after a certain number of times, to assess the degree of damage to the sample.
Meet the criteria:
GB/T 8948-2008. JIS L1096. K6404ASO M403
Product Advantages:
Measures Key Durability Property: Evaluates the resistance of flexible materials to fatigue and damage caused by repeated flexing or kneading.
Standard Compliant: Designed to meet national and international standards for flexing or kneading resistance testing of leather, textiles, and similar materials.
Versatile Material Testing: Applicable to a range of flexible sheet materials like natural leather, artificial leather, and woven fabrics.
Provides Objective Assessment: Allows for assessment of damage after a set number of cycles or determination of cycles to failure.
Controllable Test Parameters: Enables setting and controlling the flexing stroke, number of cycles, and applied pressure.
Product Features:
Based on the provided introduction and the typical design of Scott-type flexing testers for flexible materials:
Clamping fixtures located at both ends to securely hold the test specimen.
Mechanism that moves the clamping fixtures to induce a controlled back-and-forth bending or kneading action on the sample.
Controllable flexing stroke or bending angle.
Counter to record the number of flexing cycles performed.
System for applying a specified pressure to the sample during flexing (as mentioned, "appropriate pressure").
Likely includes multiple testing stations to test several samples simultaneously, increasing efficiency.
Robust construction suitable for repetitive flexing tests.
在线联系供应商
Other supplier products
 |
Slip Resistance Tester | Slip Resistance Tester - Leather and Footwear - standard Standards: BS EN 13287，EN ISO 20344，Satra TM144 Applications: To measure the sli... |
 |
Auto ignition Point Liquids Tester | Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005)... |
 |
Rolling load tester/ Rolling Load Durability Tester / Material Rolling Load Tester | Standard EN 1569: Determines rolling load resistance of synthetic sports surfaces (e.g., PU, PVC, rubber). EN 14904: Tests performance of multi... |
 |
Respirator Fit Tester | Applications: Overall Mask Leakage Test: Mask leakage is measured while the mask is challenged with an aerosol, with or without a plugged filter... |
 |
Salt Spray Test Machine | The Salt Spray Tester is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the material... |
Same products
 |
Scott Flex Tester | 卖方: 标准集团 | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | 卖方: 标准集团 | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
