Non-Carbon Epoxy Antistatic Anticorrosive Finish
The non-carbon epoxy Antistatic Finishis a topcoat that prevents the generation and accumulation of static electricity charge on the inner wall of a steel storage tank and has good anti-corrosion properties. It contains special conductive materials, anti-rust pigments, curing agents and additives. It is characterized by low surface electricity resistance, good electrical conductivity, quick elimination of static charge accumulation, good resistance to media (water, kerosene, diesel, gasoline, etc.) corrosion, suitable for inner walls of oil storage tanks, and another antistatic area in electronic industry.
Advantages of Non-Carbon Epoxy Antistatic Anticorrosive Finish
The film with excellent corrosion resistance and stable resistivity.
Excellent resistance to penetration and without polluting to oil.
Excellent heat resistance (≤200 ℃)
Tough film with abrasion resistance and good workability
Specification of Non-Carbon Epoxy Antistatic Anticorrosive Finish
|
Type |
Solvent |
||||
|
Solid Content |
70% |
||||
|
Mixing Ratio |
Two components Part A: Part B=5:1 by weight |
||||
|
Dry Film Thickness |
50μm per coat |
||||
|
Specific Gravity |
|||||
|
Coverage Rate (Theoretical) |
|||||
|
Drying Time |
Temperature |
10℃ |
20℃ |
30℃ |
|
|
Dry to touch |
2hrs |
||||
|
Dry Hard |
18hrs |
12hrs |
10hrs |
||
|
Package |
24kgs for one kit: Part A 20kg and Part B 4kg |
||||
Why must the inner wall of the oil tank be coated with antistatic paint?
In the process of filling and discharging, the relative movement of the oil product with the tank body will increase the static voltage on the inner wall of the oil tank.
When liquid oil is flowing, filtering, mixing, spraying, flushing, filling and shaking, the electrostatic charge generation rate is higher than the leakage rate, and the electrostatic charge will also accumulate.
When the energy of the accumulated electrostatic discharge is greater than the minimum ignition energy of the combustible mixture, and the oil vapor and air mixture in the discharge gap is within the explosive limit range, combustion and explosion will occur.
We are aindustrial paint supplier. we provide marine boat bottom paint, bottom coat paint for boats, interior wall paintand etc. Want to know more, contact us.
在线联系供应商
Other supplier products
 |
BALLAST TANK PAINT | The ballast tank is a complex structure, the tank is dark and wet, and the working conditions are bad. The steel must be shot blasted to ISO Sa 2.5... |
 |
Epoxy Enamel | Epoxy enamel is a two-component self-drying paint composed of epoxy resin, pigments, additives, solvents and curing agents. The epoxy anti rust pai... |
 |
FUXI ® POLYURETHANE PAINT | About polyurethane paintis an important variety in modern anti-corrosion coatings. It has excellent comprehensive performance that other coating sy... |
 |
Asphalt Antifouling Paint (for ships) | Asphalt antifouling coatingis one component, it is formulated with asphalt, solvent, extender pigment and additives. It has excellent water resista... |
 |
General-Purpose Chlorinated Rubber Anticorrosive Coating (Self-Priming Paint for Ships) | Under FUXI® brand, Jinhai Special paints and coatingshave developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, sili... |
Same products
|
|
Non-Carbon Epoxy Antistatic Anticorrosive Finish | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The non-carbon epoxy Antistatic Finishis a topcoat that prevents the generation and accumulation ... |
 |
Panit Roller RCS-008 | 卖方: pental Eterna International Trade Corporation | RCS-008 ITEM NO. SIZE SPECIFICATION UNIT PACKAGING QTY/CTN ... |
 |
Paint Roller RCS-009 | 卖方: pental Eterna International Trade Corporation | RCS-009 ITEM NO. SIZE SPECIFICATION UNIT PACKAGING QTY/CTN ... |
 |
We are professional manufacture of nitrocellulose. | 卖方: 116056 | BrandName:eonyz FOBPrice:US$2640.00 FOBPort:Shanghai LeadTime:1-5days PaymentTerms:TelegraphicTra... |
 |
tyre | 卖方: Shandong New Continent Tire CO.,LTD | car tyre, truck tyre, AGR, OTR |
