3 SAM slots hf 13.56mhz rfid reader/writer - MR790
MR790 series, based on NXP PCD or compatible PCD, is the high performance USB PC/SC interface desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 3 SAM card slots in the reader which support SAM cards compliant with ISO7816 (T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset and SAM operation of various communication rate.
- Qualifications:
- • PCD: NXP RC500, RC531, RC632, RC400
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 100mm (MIFARE One, typical distance)
- • SAM card slot: 3 slots, (supported ISO7816 T=0 and T=1)
- • Interface: USB PC/SC
- • Power supply: DC5V
- • Power consumption: 0.9W
- • Dimension: 123mm × 88mm ×25mm
- • Weight: about 100g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • PC software: PTransWin
- • SDK&Program: VC, VB, C++ Builder, DELPHI, Power Builder
Other supplier products
|
|
13.56MHz RFID Reader and writer Module JMY604 with RS232C interface |
JMY604 series are RFID reader/writer module with UART serial ports. JMY604 has various functions and supports multi ISO/IEC standard of contactless... |
|
|
hf 13.56mhz ISO15693 ID reader - mr760 |
MR760 series, based on NXP SL RC400, is the desktop reader. The reader supports series IC cards according to ISO15693, and the reader imitates the ... |
|
|
arm7 mcu hf 13.56mhz rfid desktop reader and writer with usb pc/sc interface - mr810 |
MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, IS... |
|
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 |
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
|
|
RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620 |
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. Th... |
供应产品
Same products
