Brick Wall Reinforcement Mesh, Truss-mesh Reinforcement and Ladder-mesh Reinforcement.

Brick Wall Reinforcement Mesh is welded wire sheet for reinforced concrete construction. It is used in building surface, wall, ground, bridge, bank and airport. And its feature is that welding spots of warp wire and weft wire are on the same surface.Wire Diameter: 2.5-6.0 mm Width: 5cm-27cm Length: 3mm. Spacing: 40cm Surface Treatment: Welded after hot dipped galvanized, Welded after electro galvanized, Welded before electro galvanized, Welded before hot dipped galvanized, Welded by stainless steel wire.We have two types of Brick Wall Reinforcement Mesh: truss-mesh reinforcement and ladder-mesh reinforcement. Package: carton/pallet/plastic wrapped.


在线询价

至: Reinforcing Welded Mesh, Rib Mesh, Bar Chair and Tie Wire
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Brick Wall Reinforcement Mesh, Truss-mesh Reinforcement and Ladder-mesh Reinforcement.
Brick Wall Reinforcement Mesh, Truss-mesh Reinforcement and Ladder-mesh Reinforcement.
Concrete Wire Mesh
Concrete Wire Mesh
Individual Bar Chair
Individual Bar Chair
Continuous High Chair
Continuous High Chair
Concrete Reinforcing Mesh, and Its Size, Features, Types and Applications.
Concrete Reinforcing Mesh, and Its Size, Features, Types and Applications.
供应产品

Same products

管帽 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN600 1/2"~24" ;有缝 从DN15到DN1200 1/2"~48"   制造标准:国标: GB/T12459...
翻边短接
翻边短接 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN600 1/2"~24" ;有缝 从DN15到DN1200 1/2"~48"   制造标准:国标: GB/T12459...
同心大小头
同心大小头 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN600 1/2"~24" ;有缝 从DN15到DN1200 1/2"~48"   制造标准:国标: GB/T12459...
异径四通
异径四通 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN250 1/2"~12"   制造标准:国标: GB/T12459, GB/T13401,HG/T21635...
Waterproof design full plastic led light tube
Waterproof design full plastic led light tube 卖方: Dongguan City Tangxia Dachang Plastic Hardware Processing Factory Dachang Plastic Hardware Processing Factory was founded in 1998 which has been specializing in de...