Ladder Mesh Reinforcement

Ladder Mesh Reinforcement is innovative product for the building industry. The welding spots of Ladder Mesh Reinforcement warp wire and weft wire are on the same surface. It is widely used for reinforcing wall. And it can reduce cracking, increase lateral flexural strength, increase elasticity.Specifications: Raw material: low carbon steel wire, stainless steel wire. Wire diameter: from 2.5mm to 6mm. Width: 5cm, 10cm, 15cm, 20cm. Length: 3mm. Spacing: 40cm. Surface Treatment: Welded after hot dipped galvanized, Welded after electro galvanized, Welded before electro galvanized, Welded before hot dipped galvanized, Welded by stainless steel wire. Package: carton/pallet/plastic wrapped. Uses: it is widely used for in Building Surface, Wall, Ground, Bridge bank and airport.


在线询价

至: Reinforcing Welded Mesh, Rib Mesh, Bar Chair and Tie Wire
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Individual Bar Chair
Individual Bar Chair
Concrete Reinforcing Mesh, and Its Size, Features, Types and Applications.
Concrete Reinforcing Mesh, and Its Size, Features, Types and Applications.
Continuous High Chair
Continuous High Chair
Reinforcing Welded Mesh
Reinforcing Welded Mesh
Pipe-Line Reinforced Mesh
Pipe-Line Reinforced Mesh
供应产品

Same products

管帽 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN600 1/2"~24" ;有缝 从DN15到DN1200 1/2"~48"   制造标准:国标: GB/T12459...
翻边短接
翻边短接 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN600 1/2"~24" ;有缝 从DN15到DN1200 1/2"~48"   制造标准:国标: GB/T12459...
同心大小头
同心大小头 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN600 1/2"~24" ;有缝 从DN15到DN1200 1/2"~48"   制造标准:国标: GB/T12459...
异径四通
异径四通 卖方: Zhejiang Jiede Pipeline Industry Co., Ltd 成型工艺:冷压成型   尺寸范围:无缝 从DN15到DN250 1/2"~12"   制造标准:国标: GB/T12459, GB/T13401,HG/T21635...
Waterproof design full plastic led light tube
Waterproof design full plastic led light tube 卖方: Dongguan City Tangxia Dachang Plastic Hardware Processing Factory Dachang Plastic Hardware Processing Factory was founded in 1998 which has been specializing in de...