土工格室
The geocell is an innovative geosnthetic product providing cost-effective solutions for ground stabilization,erosion control and earth retention difficulties.
It is a lightweight and flexible cellular structurer made of polyethylene strips.These strips are
ultrasonically bonded together to form this extremely strong configuration.
A variety infill materials can be filled into Geocell system; aggregate, concrete, sand, soil, etc.
The utilization of Geocell and appreciate infill materials provide versatile and economical solutions for many applications
Roll Width: 5.7M (Fixed), Roll length: 6.22M
Jonit distance:400mm, Mesh Size: 282mmx 282mm
Thickness: 1mm,1.2mm,1.5mm,2mm
Height: 50mm,100mm,150mm,200mm
Characteristics:
It is flexible and folded during transportation, stretching out and being filled with stone or gravels
during service, and forming into structure with powerful lateral confinement and rigidity.
It can be used as cushion coat to strengthen loading capacity of weak ground or slope protection structure, as well as support block structure, and so on.
Appplications:
1.Stable railway ground.
2.Stable weak ground of roads.
3.Bear the load of dike and retaining wall.
4.The improvement of shallow water riverway.
5.Act as support in pipeline and sewer.
6,For the prevention of landslide by useing geocell as a heavy-duty hybrid force retaining wall.
7,To be used as independent wall, wharf and breakwater, etc.
8.Treat desert, beach, riverbed and bank.
Main Product Technical Specifications of Geocell
Item No.
Hight of Each
Cell(mm)debiation
Welding points distance
(mm)
Thickness of Geocell Sheet
(mm)
Seam Peel Strength(N/cm)
Tensile Strength of Connection of Cells
(N/cm)
Tensile Strength at Yield of Each Sheet
(N/mpa)
GS50
50
330≤A<1000
≥1.1
≥100
≥120
≥20
GS75
75
330≤A<1000
≥1.1
≥100
≥120
≥20
GS100
100
330≤A<1000
≥1.1
≥100
≥120
≥20
GS150
150
330≤A<1000
≥1.1
≥100
≥120
≥20
GS200
200
330≤A<1000
≥100
≥120
≥20
Material Properties
Unit
Test Value
Polyemer density
g/m3
0.935-0.965
Enviromental Stress Crack Resisitance
hours
400minimum
Carbon black content
%by weight
1.5% minimum
Nominal Sheet Thickness
mm
1.52±5%
Physical Properties
Unit
Typical Value
Nominal Expanded Cell size
(width×length)
mm
518×435
Nominal Expanded Section
(width×length)
m
2.59×13.05
Nominal Expanded Section Area
M2
33.8
Cell depth
mm
75
100
150
200
Seam Peel Strength
N
1055
1410
2120
2830
Note:
1,Weld Distance from the conventional 330mm to 660mm, also can be tailored according to the requirement of customer.
2,Height can be adjusted according to customer requirements.
在线联系供应商
Other supplier products
|
|
土工格室 | The geocell is an innovative geosnthetic product providing cost-effective solutions for ground stabilization,erosion control and earth retention di... |
 |
聚酯格栅 | The polyester geogrid is a kind of reticular structural material with PVC coating.They are manufactured from high tensile and modulus polyester yar... |
 |
聚酯格栅 | The polyester geogrid is a kind of reticular structural material with PVC coating.They are manufactured from high tensile and modulus polyester yar... |
 |
PP双向格栅30kn | Introduction: PP Biaxial Geogrid 1. Made of Polypropylene (PP); 2. Strong tensile strength in both vertical and horizontal directions; 3. Widely... |
 |
玻纤格栅50kn | Fiberglass geogrid is a new kind of excellent geosynthetic material which are used for road surface reinforcement,,strengthen the soft land base,et... |
