ridge cap roll forming machine
This ridge cap roll forming machine is designed for continuously rolling and cold forming steel sheets. Our ridge cap roll forming line adopts steel sheet as the raw material, decoiling, continuously rolling and cold-forming, then automatically cutting the sheet to specified size and conveying the finished panel to the runout table.
Ridge Cap Roll Forming Machine Technical Parameter
Item |
Parameter |
Remark |
|
Material |
Type |
Colored steel sheet |
|
Thickness (mm) |
|||
Yield strength (MPa) |
230-300 |
||
(mm) |
418 |
||
Coil weight (t) |
3 |
||
OD (mm) |
Φ1350 |
||
ID (mm) |
Φ508 / Φ610 |
||
Material of rollers |
|||
Forming speed (m/min) |
15-20 |
Cutting time excluded |
|
Power source |
AC380V, 50 Hz, 3 Phase |
According to actual design |
|
Total power (kW) |
About 8 |
According to actual design |
|
Dimension (L × W × H, mm) |
See the layout |
According to actual design |
Ridge Cap Roll Forming Line Working ProcessDecoiling → feeding → roll forming → punching → cutting to length → conveying the finished products to the runout tableRidge Cap Roll Forming Machine Components
Item |
Quantity |
Technical Description |
|
Decoiler system |
Passive decoiler |
1 set |
Cantilevered passive decoiler |
Main forming system |
Feeding device |
1 set |
|
Roll forming system |
1 set |
||
Punching System |
1 set |
||
Post-cutting device |
1 set |
||
Output system |
Runout table |
1 set |
For supporting the finished panels and stacking them together. |
Hydraulic system |
1 set |
Separated hydraulic station. |
|
Electric control system |
1 set |
PLC Control. Operation mode: buttons. Speed adjusting: AC frequency. |
在线联系供应商
Other supplier products
Roof tile making machine | DescriptionThis Roof tile making machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel... | |
metal wall panel roll forming machine | Ourmetal wall panel roll forming machinehas the feature of large quantity, high automation, low cost, and duration. The wall panel produced by it... | |
pipe making machine | Thispipe making machinesometimes also referred to as pipe welding machine or pipe making machine, is typically used to manufacture various type... | |
Roller Shutter Door Forming Line | Roller Shutter Door Forming Lineis the core equipment of the production line. Adopt high strength and close plate welding type, gear and chain tr... | |
H-Beam Welding Line | H-beam welding complete Lineis a wonderful technical product that integrates mechanical, electric, and pneumatic technologies. The machine, usi... |
Same products
STAINLESS STEEL SPIRAL WELDED PIPE PRODUCTION LINE | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | The stainless steel spiral welded pipeunit adopts front-swing intermittent production, which is a... | |
螺旋洗石机 | 卖方: 爱迪机械制造有限公司 | 产品特点:螺旋洗石机是砂洗机的一种,又分为单螺杆洗石机和双螺杆洗石器。砂砾石材料中的土壤和水混合的目的是从设备上的出口排出,而砂砾石材料在螺旋装置的作用下从顶部的排放口排出,从而实现砂砾石材料的... | |
Push Ball Valve | 卖方: Zhejiang Carbo Bronze Co., LTD | Because the push to connect flanged bronze ball valve is designed and manufactured with a push ro... | |
滚筒筛振动筛水泥浆高频筛分机 | 卖方: 爱迪机械制造有限公司 | 产品特点:1.结构简单,维修量小,投资少,振动小,噪音小。2.物料按近似圆形运动轨迹前进,物料分散快,进料均匀,筛分效率高。3.轴承采用机油润滑,使用寿命长。4.便于与其他设备配套,提高自动化程... | |
单缸液压圆锥机 | 卖方: 爱迪机械制造有限公司 | 产品特点:1.应用范围广:可破碎坚硬岩石,同一宿主通过更换衬板可获得多种空腔类型,适应各种应用。中碎型有一个稳定且大的进料口,用于物料的中碎(甚至粗碎)。2.该产品具有良好的颗粒形状。优化组合破... |