Roof tile making machine
DescriptionThis Roof tile making machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as the raw material, decoiling, then continuous rolling and cold-forming, automatically cut to the size and output the finished panel to the supporter. Roof tile making equipment is really a new type of energy-saving and high-effective producing equipment for steel structure.
Technical Parameters for Roof Tile Making Machine
|
NO |
Item |
Para |
Remark |
|
|
1 |
Suitable material |
Type |
Colored coating steel |
|
|
Thickness (mm) |
||||
|
Yield Strength (Mpa) |
230-300Mpa |
|||
|
Width (mm) |
1220 |
|||
|
Wt of the Coil (t) |
5T |
|||
|
OD |
Φ1350mm |
|||
|
ID |
Φ508 mm/Φ610mm |
|||
|
2 |
Material of rollers |
No45 chromeplate |
||
|
3 |
Forming Speed (m/min) |
3-4 |
Not including cutting time |
|
|
4 |
Power Source |
AC380V ,50Hz, 3 Phase |
||
|
5 |
Total power(kw) |
About13 |
||
|
6 |
Dimension (L×W×H, m) |
See the layout |
||
Working Process for Roof Tile Making MachineDecoiling→guiding device→roll forming→punching→post cutting→product supporter
Components Parts of the Roof Tile Making Equipment
|
Name |
Model/Name |
Quantity |
Technical Description |
Components show |
|
5T Cantilever type hydraulic decoiler |
1set |
Cantilever, hydraulic expanding, hydraulic motor actively release the sheet with light control |
||
|
Pre-cutting device |
1set |
|||
|
Guiding device |
1set |
|||
|
Roll forming system |
1set |
|||
|
Punching Die |
1set |
|||
|
Post-cutting device |
1set |
|||
|
Supporting Table |
1sets |
For supporting the finished panel. |
||
|
1set |
Hydraulic station |
|||
|
1set |
PLC Control, encoder automatic cutting in length Operation stage: button AC frequency for adjusting the speed |
|||
|
Roof tile making machine (Profile and layout drawing) |
||||
|
Finished products show ( Roof tile) |
||||
在线联系供应商
Other supplier products
 |
filter frame roll forming machine | The cutter model about thefilter frame roll forming machineis flying cut; it is continuous cut style;There is no waste piece after cut actions. ... |
 |
steel floor plate roll forming machine | This steel floor plate roll forming machine is primarily used for the integrated production of trailer floor plates. This diamond plate roll fo... |
 |
C post roll forming machine | Our C post roll forming machine is used to produce C posts for guardrails as per customer requirements. This C post roll forming line can continu... |
 |
plate slitting machine | Theplate slitting machineis a kind of slitting equipment, which is mainly used in cutting and producing of cold-rolled steel coil, stainless st... |
 |
cassette type roll forming machine | Thiscassette type roll forming machineis the special equipment for continuous rolling and cold-forming on steel sheet. There are two cassettes ... |
Same products
 |
全自动开料机 GT-ACT29 | 卖方: 肇庆古雷特科技有限公司 | 自动管材切割机用于自动切割加热元件的管材。主要用于大规模生产中的加热器制造。适用于铜管、铁管、不锈钢管、铝管等。*主要详情1. 自动送料、切割、断管和自动卸管。2. 可以裁剪成两种不同的长度。3... |
 |
Anti-corrosion SSAW Steel Pipe | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm 数显轨距尺 | 卖方: 武汉联科瑞际轨道设备有限公司 | 铁路数显轨距尺主要用于铁路线路轨距、超高、查照间隔、护背距离 的测量。可供工务维修、大修、工程测量及其他有关部门线路作业时使用。 该仪器测量速度快、使用方便，白天、夜间均可使用，是工务、工程部门... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | 卖方: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | 卖方: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
