Maintenance Work for the FTM Straw Pellet Mill

As to the maintenance work for straw pellet mill, it should start from the first run of straw pellet mill. After each run, you should clean the straw pellet mill and record the working condition. To make the work of straw pellet mill more smooth, you should check the distance between press roller and ring die timely.

straw pellet mill

Of course, the wearing condition of rollers should be included into the check content. To get the biomass pellets with excellent performance, you should make the distance between press roller and ring die at about 1.5-2.5mm. If distance between press roller and ring die is wider than 2.5mm, output and working efficiency of straw pellet mill will be seriously influenced.

As to the ways to adjust the distance between press rollers and ring die, they are listed into the following content. At first, you should use the hook spanner to dismantle the round screws and take off the roller plates. Then, you should use the allen wretch to dismantle the screws for clamping the eccentric shaft inside the scraper blade.

At last, you should use the wretch to rotate the eccentric part on shaft. For the work to dismantle the other press roller, it should be similar with the above content. After adjusting the distance well, you should fasten the locking screws, reset the linking boards and lock the round screws.

Known as the NO.1 brand of straw pellet mill, FTM China Machinery can offer you the greater discounts on website to extend the world markets. Free E-books for you!

Fote Heavy Machinery: www.woodpelletmillsell.com

Fote Official Email: vip@sinoftm.com



在线询价

至: 河南富特重型机械有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Coal Briquette Machine is Worthy of Your Trust
Coal Briquette Machine is Worthy of Your Trust
Wonderful Features of Liquid Fuel for Slurry Dryer
Wonderful Features of Liquid Fuel for Slurry Dryer
Factors for Molding Rate of Coal Briquette Plant
Factors for Molding Rate of Coal Briquette Plant
Reasons to Take FTM Wood Pellet Mill into Use
Reasons to Take FTM Wood Pellet Mill into Use
How Does VSI Sand Maker Work?
How Does VSI Sand Maker Work?
供应产品

Same products

Pellet 卖方: топливные гранулы пеллеты pellet
带锯条辊压机
带锯条辊压机 卖方: 邢台国旺机械设备制造有限公司 锯条辊压机主要用于辊压带锯条,调整锯条的适张度,使锯条在锯轮外缘上平稳地贴附。目的是在锯割时不发生窜条,是带锯机不可缺少的配套辅助机械。 本机压辊采用优质钢材,经过高精度处理,硬度高,寿命长。轴...
Selling woodworking machinery. All equipment is in excellent condition, almost new!
Selling woodworking machinery. All equipment is in excellent condition, almost new! 卖方: iidapro
ld  2030 rack engraving machine
ld 2030 rack engraving machine 卖方: Beijing Longdiao Nc Equipment Co.,LTD
ld  2030 rack engraving machine
ld 2030 rack engraving machine 卖方: Beijing Longdiao Nc Equipment Co.,LTD