Maintenance Work for the FTM Straw Pellet Mill

• 

As to the maintenance work for straw pellet mill, it should start from the first run of straw pellet mill. After each run, you should clean the straw pellet mill and record the working condition.To make the work of straw pellet mill more smooth, you should check the distance between press roller and ring die timely.

Of course, the wearing condition of rollers should be included into the check content. To get the biomass pellets with excellent performance, you should make the distance between press roller and ring die at about 1.5-2.5mm.If distance between press roller and ring die is wider than 2.5mm,output and working efficiency of straw pellet millwill be seriously influenced.

As to the ways to adjust the distance between press rollers and ring die, they are listed into the following content. At first, you should use the hook spanner to dismantle the round screws and take off the roller plates. Then, you should use the allen wretch to dismantle the screws for clamping the eccentric shaft inside the scraper blade.

At last, you should use the wretch to rotate the eccentric part on shaft. For the work to dismantle the other press roller, it should be similar with the above content. After adjusting the distance well, you should fasten the locking screws, reset the linking boards and lock the round screws.

Known as the NO.1 brand of straw pellet mill,FTM China Machinerycan offer you the greater discounts on website to extend the world markets. Free E-books for you!

Fote Heavy Machinery:

Fote Official Email:

Send product request

To: Henan Fote Heavy Machinery Co,. Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

	Coal Briquette Machine is Worthy of Your Trust	Someone may question that the resources of oil and natural gas can enough take the place of coal energy. While, for most countries, to realize this...
	How to Run Fote Coal Briquette Plant at Normal?	If you are troubled with the wastes like powders, scrap, waste residue such as pulverized coal, iron powder, coking coal, aluminum ash, iron filing...
	What Should You Do After Running the VSI Crusher?	After turning on the VSI crusher, you should firstly make it run without loads, then do the feeding work after the above run is normal.Feeding work...
	Working Principle of FTM Impact Crushing Machine	Among all crushers, impact crusher and cone crusher are mainly used for the secondary and tertiary crushing. While, in aspects of crushing principl...
	mining machine

All supplier products

Same products

	NANO TECHNOLOGY BLACK GOLD ENGINE OIL W20	Seller: Shanghai Aikebao New Material Technology Co., Ltd	E2 of lube base oilis suitable for models that match 5W-20, 0W-20 viscosity and GPF equipped with...
	Diamond Wire Saw For Marble	Seller: Hebei XMF Tools Group Co., Ltd	The Diamond Wire Saw For Marblefrom XMF Toolsis specifically developed for safe, efficient, and e...
	circular saw	Seller: O&K GROUP LIMITED	Looking for Quality Products? From electronics to home essentials, fashion to industrial supplie...
	HSC Paper Sheeting Machine	Seller: Suzhou Paper Saw King Technology Co.,Ltd	HSC Paper Sheeting Machine Product Description HSC Paper Sheeting Machineincorporates an advanc...
	Bottom Feed Slitting Rewinder	Seller: Suzhou Paper Saw King Technology Co.,Ltd	Bottom Feed Slitting Rewinder Product Description The bottom feed slitting rewinderreceives pap...