Xlpe/pvc Shielded Low Voltage Power Cable
Shielded cable:
A shielded cable is an electrical cable of one or more insulated conductors enclosed by a common conductive layer. The shield may be composed of braided strands of copper (or other metal, such as aluminium), a non-braided spiral winding of copper tape, or a layer of conducting polymer. Usually this shield is covered with a jacket. The shield acts as a Faraday cage to reduce electrical noise from affecting the signals, and to reduce electromagnetic radiation that may interfere with other devices. (For more, see electromagnetic interference). The shield minimizes capacitively coupled noise from other electrical sources. The shield must be applied across cable splices.
In shielded signal cables the shield may act as the return path for the signal, or may act as screening only.
XLPE/PVC shielded low voltage power cable:
1. Applications
Control cables are used in the site of control circuit, monitoring circuit and protective lines that have A.C rated voltage of 600/1000 V and below.
2. Manufacturing Standards
The control cable comply well with IEC 60227, IEC60502, IEC 60332-3, IEC 60754-1 and IEC 61034 etc.
3. Operating Features for XLPE/PVC Insulated PVC Sheath Copper Conductor Armoured Shielded Control Power Cable:
•The maximum allowable temperature of conductor is 90°C for XLPE cable or 70°C for PVC cable at normal operation. •The temperature not less than 0°C when cables laid. •Installation bending radius of cable: 6D for no-armor or with screen layer flexible cable. 12D for armor or copper tape screen cables. (D=overall diameter of cable)
4. Construction for XLPE/PVC Insulated PVC Sheath Copper Conductor Armoured Shielded Control
Generally speaking, there are two ways of copper wires braided screen and copper tape wrapped screen for control cables, however, copper wires braided screen has stable structure, the effect of screen won’t change with the cable bending or appearance factors etc , but also doesn’t have influence on cables’ flexibility, braiding density can reach over 80%, besides, copper tape wrapped screen percentage of coverage can reach up to 100%.
Plastic PVC Insulated Screened control Cables are used for rated voltage up to and including 450/750V.
The long-term operating temperature of PVC insulation cable conductor should be lower than 70°C,and that of XLPE insulation should be lower than 90°C.
The installing ambient temperature of cables shouldn’t be lower than 0°C,the Min. bending radius of installing is 6 times of the outer diameter.
If you are interested in any of our products, please contact us directly.
Factory information:
Welcome to our factory !
Factory Name
Jiangsu Changcheng Cable Co.,Ltd
Location
Lingtang Town,Yangzhou,Jiangsu ,China
Establishes in
1990,more than 25 years’ experience in cable manufacturing
Export office location
Yunhe Building,Hanjiang Area,Yangzhou,China
Our main products
Control cable
Instrumentation cable
Power cable
Cable and electrical wires for installation
High temperature cable
Flame retardant and Fire-resistant cable
Special cable
Cable tray
Street lighting
Other supplier products
|
0.6/1kv Low Voltage Power Cable |
0.6/1kv low voltage power cable:
Introduction:
Low voltage power cables,Website:, wire and cords (0.6/1kV) are used in most of ele... |
|
Aluminium Low Voltage Power Cable |
Choosing conductive metals for different industries and applications can be a challenge. Copper is often used in cables and wires because of i... |
|
Armoured Low Voltage Power Cable |
There are a great many reasons why you would need armoured cable,Website:, but there are a wide array of armoured cables to choose from. So wh... |
|
Xlpe/pvc Shielded Low Voltage Power Cable |
Shielded cable:
A shielded cable is an electrical cable of one or more insulated conductors enclosed by a common conductive layer. The s... |
|
Cooper Low Voltage Power Cable |
Copper is the electrical conductor in many categories of electrical wiring. Copper wire is used in power generation,Website:, power transmissi... |
供应产品
Same products