Edge Plating/Half-hole PCB
Half hole pcb
The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on the edge of the board is already a mature process in PCBSKY PCB manufacturing processing.
How to control the quality of the product after forming the Half-hole on the edge of the board. For example, the copper spurs of the hole wall and the residue have always been a problem in the processing.
This type of board has a row of half hole in the PCB, which is characterized by a relatively small aperture, mostly used on the carrier board, as a daughter board of the motherboard, through the half-hole and the motherboard and components The feet are welded together.
Therefore, if there are copper thorns remaining in these half-hole, the soldering of the plug-in manufacturers will result in inaccurate solder joints and weak soldering, which will cause a bridge short circuit between the two pins.
Half hole pcbhas a minimum processing capacity of 0.4 mm for the sample and a minimum of 0.5 mm for the batch.
pcb edge platingdoes not have a set definition per IPC. However, the industry generally accepts this as being copper plating that continues from the top and bottom surfaces and along one or more perimeter edges. The pcb edge plating processcan be used for a variety of purposes, including, but not limited to edge soldering, edge connections, and to increase current carrying capacity. Burrs Often edge plating, especially on castellations, can result in burrs from the final machining process.
We apply a modified, proprietary process flow that results in the burrs being polished down to the edge of the feature. Copper Peeling Plating over a large substrate surface can lead to the plated copper peeling due to a lack of adhesion strength. We address this by first roughening the surface through a combination of chemical and other proprietary means. We then use direct metallization, which has a higher copper bond strength, to prepare the surface for plating.
Welcome to custom Edge Plating PCB / Half Hole PCB directly from PCB Factory at low cost.And welcome to custom pcb fabricationfrom PCB MANUFACTURER CHINA.
在线联系供应商
Other supplier products
 |
Blind & Buried VIA PCB | Custom blind and buried vias fabricationfrom professional and experienced pcb board supplier at low cost. First of all, we start with traditional ... |
 |
Blind & Buried VIA Hole PCB | Custom blind and buried vias fabricationfrom professional and experienced PCB board supplier at low cost. First, we start with traditional multi-l... |
 |
PTFE Teflon PCB | PTFE Teflon PCB has excellent comprehensive performance: high temperature resistance (-192°C-260°C), corrosion resistance (strong acid, str... |
 |
Edge Plating/Half-hole PCB | Half hole pcb The walls of the PTH holes on the PCB are plated with Half-hole formed by smooth and complete metal forming.The Half hole process on ... |
 |
Double Sided Flexible PCB | After the double-sided PI board copper-clad board material is used in the double-sided circuit, a protective film is added on both sides to form a ... |
Same products
 |
SPD for AC Power Supply | 卖方: Shenzhen Techwin Lightning Technologies Co., Ltd | SPD for AC Power Supply is mainly applicable to the power distribution systems for Class I / II /... |
 |
Electric Chainsaw | 卖方: Zhejiang GuYueHu Industry&Trade Co.,Ltd. | Suca battery electric chainsawis not only powerful but also good for the environment. The electri... |
 |
Matrix Body PDC Bit For Oil Well Drilling Hard Rock | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Matrix Body PDC Bit GM1605T Matrix body PDC bit GM 1605T is made by Tungsten carbide... |
 |
Matrix Body PDC Bit | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | GREAT, as one of the professional drill bit manufacturers in China, we design and manufacture a w... |
 |
Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency | 卖方: Cangzhou Great Drill Bits Co.,Ltd. | Overview of Hybrid Drill Bit Hybrid drill bits are compounded by the PDC fixed cutting and the r... |
