outdoor type Oil - immersed Capacitive Voltage Transformer( CVT)
Capacitive voltage transformer (CVT) for the stacked structure, by the capacitive voltage divider and the electromagnetic unit of two parts. Capacitor divider consists of one or several sections of capacitors in series, a terminal at the top of the capacitive voltage divider, the installation direction can be rotated according to site needs. The top of the capacitive divider is equipped with an expander to adjust the oil volume change caused by temperature changes. The electromagnetic unit is mainly composed of intermediate transformer, compensation reactor, damping device and fuel tank. Fuel tank with junction box, oil level inspection window, oil injection hole, drain valve and ground plate, the secondary terminal from the junction box leads.
Other supplier products
|
|
XGN46-40.5 Case Gas Insulated Metal enclosed Switchgear |
XGN46-40.5 Case Gas Insulated Metal-enclosed Switchgear (briefed as C-GIS in the following), a complete power distribution device for 40.5 kV, thre... |
|
|
GW6A-126/145/170/252/363/550 Series, single column, double arms, vertically shrinkable type, HV, AC disconnector |
GW6A outdoor three-phase high-voltage AC disconnector, rated frequency 50Hz, rated voltage 126k-252kV, is applicable for the switch operation under... |
|
|
TK-XBZ pole mounting type HV Var Compensation |
The device integrates voltage monitor and var compensation, which is used to improve the large power and high line-loss situation of 10kV/6kV line,... |
|
|
SF6 gas Micro-water content on line monitoring Detector |
Based on advanced detection technology, control technology, communication technology and years of research on metal-enclosed switchgear, we success... |
|
|
66-550kv YJLW02 longitudinal water-proof XLPE power cable |
1 Standard 1) Conductive core(800mm2 and the below is tightening circle, the above is cutting structure) 2) The shielding layer of the conducto... |
供应产品
Same products
