Water Type Mold Temperature Controller
Mold temperature controller◆Controlled by microcontroller, and consists of LCD screen and keyboard. ◆P.I.D. multi-stage temperature control maintains mold temperature with accuracy of ±0.5°C.◆Chinese and English interface is available; easy to operate system and to understand warning messages.◆The electrical and heating equipment are separated to avoid high temperature damage to machine. ◆Adopted high quality and efficiency pump, applicable to all kinds of mold temperature control requirement.◆The inside is made of stainless steel that resists corrosion and stands high pressure with high heating efficiency.◆6 safety and protective measures include broken thermocouple alarm, reversed phase, faulty phase, overload, overheat and water shortage.ModelMediumMax. Temp.PumpPower (kW)Max. Flow Rate (L/min)Pump Lift (m)Tank Capacity (L)Heating Power (kW)Inlet/Outlet Diameter (inch)Dimension (cm)Weight (kg)WSTW-06UWater95°C0.373530612mm×396×30×7060WSTW-09U0.755030912mm×396×30×7060WSTW-12U1.580451212mm×496×30×7060WSTW-24U2.2200302412mm×4125×44×105120WSTW-36U3.7538035361.5"125x44x105130WSTW-60U3.7538035601.5"125×44×105135WSTW-06U-D0.37×235×2306×212mm×688×50×6898WSTO-06U -D HeatTransfer Oil 200°C0.37×235×23010×26×212mm×688×50×68102WSTO-06U -R160°C0.5533401863/8"×3105×35×8480WSTO-09U -R0.7545401893/8"×3105×35×8485WSTO-06U200°C 0.3735301063/8"×396×30×7062WSTO-09U0.7550301093/8"×396×30×7065WSTO-12U1.5804510123/8"×496×30×7075WSTO-24U2./8"×4125×44×105120WSTO-36U3..5"125×44×105130WSTO-60U3..5"125×44×105135The noise is less than 75DB within one meter from the machineModelMax. Temp.(℃)Heating Power(kW)Pump Power(kW)Max. Flow Rate(L/min)Pump Lift(m)Inlet/Outlet Diameter（inch)Dimension (cm)VTW-06U12060.3735303/8"×396×30×70VTW-09U90.7550303/8"×396×30×70VTW-12U121.580453/8"×496×30×70VTW-06U-H16060.5530453/8"×396×30×70VTW-09U-H90.7545603/8"×396×30×70VTW-12U-H121.590553/8"×496×30×70High temperature water type mold temperature controller parameterModelMax. Temp.(°C)HeatingPower(kW)Pump Power(kW)Max.FlowRate(L/min)Pump Lift(m)Inlet/Outlet Diameter（inch)Dimension (cm)VTO-06U30060.535403/4"×1105×35×84VTO-9U9145433/4"×1105×35×84VTO-12U121.550503/4"×1105×35×84VTO-24U242.270654"×1125×44×105High temperature oil type mold temperature controller parameterNote: For stable operation, the pressure of cooling water should be between 2 and 5kg/cm.
Other supplier products
|
|
|
◆Controlled by microcontroller, and consists of LCD screen and keyboard. ◆Simple operating system interface with troubleshooting function.◆Equipped... |
|
|
|
Mold temperature controller◆Controlled by microcontroller, and consists of LCD screen and keyboard. ◆P.I.D. multi-stage temperature control maintai... |
|
|
|
1.Excels at granulating runners and regrinds.2.Moderate speed realizes low noise and reduces wear of blades. 3.Small footprint and equipped with ca... |
|
|
|
FEATURES ◆Lower noise, well-proportioned granule and less powder.◆Adopted Taiwan gear reducer with large torque, good quality and long service life... |
|
|
|
◆Added a hose to recycle airflow to be more environmentally-friendly.◆Features internal circulation of hot air to reduce heat lost.◆Concentrated th... |
供应产品
Same products
