oil density Tester FDT-1531
Application range
The calorific value of automatic oil tester complies with GB/T384, electricity, coal, paper, petrochemical, cement, agriculture and animal husbandry, medicine and scientific research, teaching and other industries and sectors apply to measuring the calorific value of coal, oil and other combustible materials.Features
1, the instrument exclusive ampoule capsule configuration requirements of national standards test detected light oil biodiesel volatile greatly improve the accuracy.The preferred alternative to traditional Calorimeter deviation on the volatile oil sample test results in the past too large equipment. (Customer when ordering, please indicate the test sample)
2, high degree of automation: automatically adjust the temperature, automatic and accurate quantitative inner cylinder water, automatic water circulation within the cylinder, to automatically determine the water level in the outer cylinder the manual content only known sample weight, loaded aerobic bomb, the other by the instrument to complete automatic control , convenient and quick.
3, high test accuracy: accurate temperature measurement system, temperature resolution of up to 0.0001 ° C, to achieve accurate measurements.
Test results reliable: the standard correction formula results in true and reliable.
5 powerful software: a self-diagnostic function, clear calorific needs a variety of data processing operations and state.
Oxygen bomb: the Flanders specially dedicated oxygen bomb ignition wire can be processed in poor contact, causing the test can not be normal phenomenon.Improve work efficiency.
7 using a novel compact the automatic oxygen bomb oxygenation instrument, without having to manually pressurized
8, set aside the standard interface: can be associated electronic balance, the weight of the sample is automatically entered; easy connection to the LAN.Asynchronous multi-control technology, a computer controlled automatic tube or other instruments of the Company.Specifications
1, temperature range: 5 ℃ ~ 40 ℃
2, the temperature resolution: 0.0001 ℃
3, the heat capacity of precision: ≤ 0.1%
Test time: 8min left and right of the main stage
Detection: automatic detection
6, print: brand printers
7, the control mode: computer control
Other supplier products
|
|
Automatic flash tester of petroleum products (Cleveland open cup method) |
Application range
The automatic trace moisture analyzer is the design and manufacture of the requirements set by national standards GB/T7600 usi... |
|
|
Grease shear tester FDH-4201 |
Application range
Grease million times shear tester applicable standards: GB/T269, ISO2137, ASTMD217 IP50 Scope: grease by mechanical shear, consi... |
|
|
FDH-0501含抗氧剂汽轮机油氧化安定性测定仪 |
适用范围
含抗氧剂汽轮机油氧化安定性测定仪依照SH/T0124的要求设计制造，将装有试样的氧化管放入温度为120°的加热浴中通氧164H，实验结束后测定挥发性酸值、可溶性酸值及油泥含量。
功能特点
1、含抗氧剂汽轮机油氧化安定性测定仪采用液晶显示、中文操作界面2、含抗氧剂汽轮... |
|
|
oil density Tester FDT-1531 |
Application range
Distillate fuel oxidation stability side of the analyzer (acceleration method) measured in accordance with the SH/T0175-94, ... |
|
|
FDH-0171润滑油抗乳化性能测定仪 |
适用范围
该仪器为国内首创产品，代替原有的有纸记录仪，仪器采用液晶触摸屏全自动控制系统，操作人员只要把试样放进仪器里，仪器自动检测、打印结果，整个过程无需人工操守。其原理是将试样、蒸馏水和铜催化剂线圈一起放到玻璃试管内，然后把它放进氧弹中，氧弹在室温下充入氧气，放入规定温度的油浴中... |
供应产品
Same products
