PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA66 GF 15Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.
AnmeiPA66 GF15 Storage and Handling
PRE-PROCESSING：
Pre-drying: 4-6h / 130°C
Processing:
Melting temperature 280 - 300 °C
Mold temperature 60 - 100 °C
Product storage and handling:
PA is a highly hygroscopic material. When the dryPA materialis exposed to the atmosphere, it will absorb moisture quickly, so it is recommended to keep it sealed. In order to ensure the best performance index after extrusion, the material must be dried before processing, and the moisture content of the particles should not exceed 0.02%. It is recommended that the material be dried at 110-130°C for 4~6h.
PA GF15Heat Stabilized (A2006C) Typical Application
PA66 15% glass fiber and heat stabilized modified grades are applied to the sectors of circuit breaker, electrical box shell, water pump housing and cover, offering high rigidity and resistance to thermal deformation.
在线联系供应商
Other supplier products
 |
Anmei-PA6 GF for Engineering Plastics | As an engineering plastic company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineeri... |
 |
Anmei-Polyamide Nylon 6 (PA6) for Engineering Plastics | Other than fiber-reinforcedpa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers,... |
 |
Anmei-PA66 GF for Engineering Plastics | Anmeifocuses on the production of modified engineering plastics. We have polyamide PA66 modified products with propertiesof heat-resistant, rein... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | UsingPolyamide 66 as the basic resin, the tensile strength of nylon 66is obtained by blending and modifying with the addition of a toughening agent... |
 |
PA66 GF35 (A2000G, A2011G, A2111G) for Engineering Plastics | PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa6 6gf35, that is, 35% glass fiber is added to nylon 66. Typic... |
Same products
 |
PET bottle bale for sale, Plastic PET bale scrap, Plastic Bottle Scrap Supplier | 卖方: Low-Density Polyethylene Film Scrap (LDPE) Bale, Rolls, Lumps, Regrinds-LLDPE-HDPE, PE Film | 作为一家领先的塑料回收公司，我们很高兴推出我们的全新 PET 瓶垃圾系列。我们的产品线包括带盖或不带盖的蓝色和绿色 PET 瓶包，可满足各种回收需求。 我们有 5,000 个高品质 PET 废... |
|
|
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA66 GF 15Heat Stabilized (A2006C, A2016C) for Engineering Plastics PA 66 GF 15is a 15% glass fi... |
 |
EPS Block Scrap | 卖方: Walker De-Scrap Inc. | Are you looking for EPS Block Scrap or any other type of scraps and then you are welcome to our c... |
 |
aluminum wheels Scrap | 卖方: Willies De Scrap Inc | Are you looking for aluminum wheels or any other type of scraps and then you are welcome to our c... |
 |
Home and Office use Small Trash HDPE Garbage Bag | 卖方: Jinan Fengyi Commodity Co., Ltd | Home and Office use Small Trash is the most common use in our daily life, thinnest bag for light... |
