Flammability test furnace for building materials
Product Introduction
Touch screen control building materials flammability test furnace adopts stainless steel box, is in the old JCK-2 products based on the new touch screen control sample controlled automatic lifting, Bunsen lamp can adjust the function of the upgrade product, is strictly in accordance with the national standard GB8626-2007 and the production of high configuration building materials combustion grade test instrument.
Building materials flammability test furnace is in the normal combustion environment, with a small flame directly impact vertically placed samples to determine the flammability of building products Building materials flammability test furnace using the German KLEINBRENNER(Kleinbrenner) principle, in the vertical direction of the small flame direct impact, It is used to determine the combustion performance of Class B building materials (that is, it is used to determine the combustion performance of building materials/flame retardant grade B)。
Meet the standard
IS011925-2:2002E "Test Method for Flammability of Building Materials"
GB/T8626-2007 "Combustibility test Method for Building Materials"
Technical parameters
Ambient temperature :15 °C ——25°C
Relative humidity :S85%
Supply voltage and power :220V 50HZ100W
Gas source: commercial propane with a purity of not less than 95%, ordinary tests can also be replaced by liquefied petroleum gas (Note: gas source and link head user's own)
The Bunsen burner applies a flame time of 15S to the pattern
MCU control, digital display
The diameter of the burner is 0.17MM, the flame length of the Bunsen burner
20MM+1MM, the burner can be tilted 45°
Apply flame (1S-99S)+0.5S to the sample, which can be adjusted arbitrarily
Accuracy ±0.2S
Combustible gas source: propane with purity above 95%
在线联系供应商
Other supplier products
 |
Safety Helmet Flammability Tester | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, ... |
 |
Leather flexural tester | Standards EN ISO 20344:6.6: Safety footwear leather flexing resistance. I.U.P.10+20/I.U.P.20: International Union of Leather Technologists prot... |
 |
Shoe Sole Heat Resistance Tester | Reference standard EN ISO 20344. EN ISO 8772-1. GB/T 20991-2007. ANSI, JIS, CSA, GB12017-1989. LD50-1994 and other standards Main uses The sole ... |
 |
Smoke toxicity test equipment for building materials | Standards ASTM D2843 Smoke Density Test GBT20285-2006 DIN53436 JIS1321 Application Smoke Toxicity Tester Flammability Analyzer for Building M... |
 |
Geosynthetics Vertical Penetration Tester | Scope of application: Used to determine the vertical permeability of geotextile and its related products under constant water head method. The wat... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
