Luminous Afterglow Performance Tester
Luminous Afterglow Performance Tester
The luminous afterglow performance tester is suitable for testing the luminous afterglow performance of various textiles. Fibers, yarns, and powders can all be tested.
Applicable Standards
GB/T 43716 - 2024 Textiles - Test Method for Luminous Afterglow Performance - Photometer Method
Testing Principle
Use the specified light source as the excitation light source. Under the specified illuminance conditions, directly irradiate the sample. After the sample is excited to saturation, remove the excitation light source, and measure the afterglow brightness and decay time on the sample surface through a brightness meter.
Instrument Features
Automatically record the brightness value within the set time through software. Fully automatic measurement, simple operation, capable of long-time measurement, and automatically save data.
Multiple light-shielding designs in the fully enclosed test chamber reduce the influence of external light sources on test results.
Automatically switch test samples. One set of samples can be tested at a time for 3 groups.
Specially made imported sensors with fast sampling speed and high accuracy.
Wide testing range, covering powders, fibers, yarns, fabrics, etc.
Standard Configuration
1 main unit
1 Lenovo integrated computer
1 Lenovo laser printer
3 sample clamps
1 excitation light source
Technical Parameters
Excitation light source: Fluorescent lamp, color temperature (6500 ± 500) K
Brightness meter: 0 - 10000 mcd/m², resolution: 0.01 mcd/cm², accuracy: ±5%
Illuminometer: 0 - 10000 lx, resolution: 0.1 lx, accuracy: ±4%
Approximate weight of the whole machine: 30 kg
Power supply: AC 220V/50Hz
Approximate external dimensions: 375 x 500 x 598 mm (W x D x H)
在线联系供应商
Other supplier products
 |
Thermal and Water-vapour Resistance Tester | Introduction TheThermal and Water-vapour Resistance Testeris a special measurement device used for measurement of thermal and water-vapour resista... |
 |
Schopper Folding Endurance Tester | Use and Scope of application: 1. the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding d... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce t... |
 |
Automotive Wires Flammability Tester | Standards FMVSS 302(Federal Motor Vehicle Safety Standard) ISO 6722(Road Vehicle Cable Flammability) UL 94(Tests for Flammability of Plastic Mat... |
 |
Automobile seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
