Test system for large filter elements
Standards
ISO 29463-5
Technical parameters
| Measuring range (total penetration) | Up to 0.0005 % |
| Measurement range (size) | 0.02 – 100 µm |
| Volume flow | 40 – 1.500 m3/h -pressurized operation |
| Differential pressure measurement | 0 – 1.200 Pa selectable, 0 – 2.500 Pa selectable, 0 – 5.000 Pa selectable |
| Aerosols | Dusts (e.g., SAE dusts), salts (e.g., NaCl, KCl), liquid aerosols (e.g., DEHS), latex particles |
| Size filter element | 610 • 610 • 610 mm |
Advantages
Accurate, versatile testing
-Measurement according to ISO 29463-5. as well as ISO 16890 (ISO ePM1; ISO ePM2.5) possible in one channel
-Use of measurement technology in FET 100 and FET 300; dual channels on request
-Particularly wide range of application for separation efficiency measurement from 0.02 to 3 µm
•Flexibility and ease of use -Customization of filter adapters, flow channel and measuring ranges possible for optimal test performance
-Modular compact design for big filter elements, low space requirement
-Horizontal design for minimization of particle losses
-Calibration of raw gas/pure gas not necessary, because only one sampling and one measuring device is used
•Safety
-Logged results based on relevant standards
-Factory tested and calibrated test stands
Application areas
Development
•Quality control for
-Cabin filters
-HEPA/ULPA clean room filters
-Cabin air filters
-Engine air filters
-Compressor supply air filters
•Measurement of MPPS according to ISO 29463-5
•Measurement of the fractional separation efficiency according to ISO 16890
•Determination of the pressure loss at different volume flows
在线联系供应商
Other supplier products
 |
Solar Simulator Tester | The Solar Simulator is a brand-new solar energy simulator that provides a completely new solar energy experience. It features highly realistic sunl... |
 |
Glow wire tester - Test Equipment | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
Cross scratch tester | Testing Equipment | Standards Automotive Standards: PV 3952. Ford BN 108-03. BMW 0180. DAF KEUR 00824-401. GME 60401. GM 14829. Jaguar-Landrover TPJLR.52.00. GM N 146... |
 |
Horizontal Vertical Combustion Tester | Horizontal and vertical combustion testeris to simulate the early situation of a fire around the electrical environment .By simulating the actual s... |
 |
Digital Auto Burst Strength Tester | Standards ASTM D3786. ERT 80-4-20. GB/T 7742.1. BS EN ISO 13938-1. BS 3424-6-B, ISO 3303-B, ISO 2758. ISO 3303.2. ISO 3689. JIS L1018/L1093. IWS T... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
