Test system for large filter elements
Standards
ISO 29463-5
Technical parameters
| Measuring range (total penetration) | Up to 0.0005 % |
| Measurement range (size) | 0.02 – 100 µm |
| Volume flow | 40 – 1.500 m3/h -pressurized operation |
| Differential pressure measurement | 0 – 1.200 Pa selectable, 0 – 2.500 Pa selectable, 0 – 5.000 Pa selectable |
| Aerosols | Dusts (e.g., SAE dusts), salts (e.g., NaCl, KCl), liquid aerosols (e.g., DEHS), latex particles |
| Size filter element | 610 • 610 • 610 mm |
Advantages
Accurate, versatile testing
-Measurement according to ISO 29463-5. as well as ISO 16890 (ISO ePM1; ISO ePM2.5) possible in one channel
-Use of measurement technology in FET 100 and FET 300; dual channels on request
-Particularly wide range of application for separation efficiency measurement from 0.02 to 3 µm
•Flexibility and ease of use -Customization of filter adapters, flow channel and measuring ranges possible for optimal test performance
-Modular compact design for big filter elements, low space requirement
-Horizontal design for minimization of particle losses
-Calibration of raw gas/pure gas not necessary, because only one sampling and one measuring device is used
•Safety
-Logged results based on relevant standards
-Factory tested and calibrated test stands
Application areas
Development
•Quality control for
-Cabin filters
-HEPA/ULPA clean room filters
-Cabin air filters
-Engine air filters
-Compressor supply air filters
•Measurement of MPPS according to ISO 29463-5
•Measurement of the fractional separation efficiency according to ISO 16890
•Determination of the pressure loss at different volume flows
Send product request
Other supplier products
 |
Wool Fineness Analyzer | Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample ... |
 |
Spring torsion tester | The Spring Torsion Tester is designed to precisely measure torsional properties, including torque and angle, for a wide range of torsion springs an... |
 |
Low-Temperature Bending Resistance Tester manufacturer | Applicable Standards The tester adheres to international standards for material testing at low temperatures, including: ISO 4674-2(Rubber- or pla... |
 |
Taber muiti-finger scratch tester | IntroductionTaber muiti-finger scratch tester - Model 710(multi-finger scratch/mar tester 710) is used to measure the relative resistance or suscep... |
 |
Automobile Sealing Strip Wear Test Machine | The TL52057 automotive sealing strip abrasion tester is a professional device specifically designed to evaluate the abrasion resistance of sealing ... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
