High-Low Temperature Gravel Impact Tester，Stone Chip Resistance Gravelometer
High-Low Temperature Multifunctional Aggregate Impact Tester is a professional testing instrument designed to accurately reproduce damage caused by flying gravel under controlled high- and low-temperature environments. This tester is mainly used to evaluate the stone-chip impact resistance of coatings, coating systems, plastics, glass, and other exterior materials. By precisely controlling impact angle, pressure, temperature, and test media, it allows comprehensive assessment of coating adhesion, interlayer bonding performance, brittleness, spall resistance, and impact durability under simulated real-world conditions.
Application
This tester is widely applied in durability and damage resistance evaluation for materials exposed to gravel impact during actual service conditions, especially in the automotive and coating industries. Typical applications include:
External coating cohesion failure testing
Interlayer adhesion failure testing of multilayer coating systems
Brittleness thickness evaluation of hard glass materials
Optimization of coating thickness for anti-spall performance
Impact, spall resistance, and wear resistance testing of plastics and glass
Stone-chip resistance testing for automotive exterior and interior components
Tested products may include automotive body coatings, plastic trim parts, glass panels, protective coatings, and other exterior decorative or functional materials.
Standards
The tester complies with and supports evaluation methods defined in the following international and industry standards:
(1) SAE J400 – Gravelometer testing for resistance of automotive coatings and materials
(2) VDA 621427 – Stone-chip resistance test for surface coatings
(3) ISO 20567-1 – Paints and varnishes – Determination of stone-chip resistance – Part 1: Multi-impact testing
(4) ASTM D3170 – Standard test method for chipping resistance of coatings
(5) GMW 14668-3.4.9 – Stone impact testing for automotive interior and exterior parts
(6) Peugeot / Citroën D241312 – Evaluation of vehicle coating resistance to stone impact
(7) Chrysler 463PB-52-01 – Stone impact resistance evaluation for materials and coatings
(8) Chrysler 463PB-39-01 – Stone impact testing for automotive components
(9) Mazda MES MN 601C – Stone impact resistance testing of materials and coatings
(10) Ford BI 157-04 – Evaluation of automotive coating resistance to stone impact
(11) Ford BI 157-05 – Evaluation of automotive coating resistance to stone impact
(12) Toyota / Nissan – Stone-chip impact test requirements for automotive interior and exterior parts
Parameters
| Item | Specification |
|---|---|
| Test environment | Temperature 5–35 °C, relative humidity ≤85% RH |
| Working pressure range | 0–5.0 kgf/cm² (adjustable), max up to 8.0 kgf/cm² |
| Compressed air pipe diameter | ≥19 mm |
| Air tank volume | 180 L (maintains 400 kPa for ≥10 s) |
| Feeding method | Automatic feeding, adjustable speed |
| VDA spray gun diameter | 30.0 ± 0.5 mm |
| SAE spray gun diameter | 52.6 ± 0.5 mm |
| Working time | 0–999 s adjustable |
| Vibration time | 0–999 s adjustable |
| Cycle count | 0–99 cycles |
| Impact angle adjustment | 3D adjustable test table, 0–180°, with digital angle display |
| Impact window size | 300 × 300 mm (adjustable support, sample thickness ≤30 mm) |
| Chamber dimensions | Approx. 1800 × 1000 × 1200 mm |
| Chamber structure | ≥6 mm steel plate with coating; 10 mm steel impact window |
| Impact media | 4–5 mm angular steel grit (61–65 HRC), 8–16 mm terrazzo, or JIS A5001 stones |
| Test pressure | 100 ± 5 kPa, 200 ± 10 kPa |
| Test cycles | 1–5 cycles |
| Spray duration | 8–12 s / 500 g or 30–35 s / 2000 g |
| Spray angle | 54° ± 1° (optional 90° ± 1°) |
| Spray distance | 10–500 mm adjustable |
| Sample size | 80 × 80 mm or 200 × 100 mm |
| Low temperature range | −20 °C to −70 °C (settable) |
| High temperature range | Ambient to 150 °C (settable) |
| Pressure range | 0–1 MPa adjustable |
| Independent temperature chamber | −40 °C to 100 °C |
| Noise level | ≤120 dBA (hearing protection required) |
| Operation mode | Continuous operation |
| Test media | Gravel, sand, steel shot, iron shot |
| Feeding rate | Adjustable via electromagnetic vibration feeder |
| Airflow control | Built-in air storage ensures stable pressure and flow |
Features
High- and low-temperature integrated testing for realistic environmental simulation
Multifunctional design supporting coatings, plastics, and glass materials
Precise control of impact angle, pressure, temperature, and spray parameters
3D adjustable impact platform for complex and irregular samples
Stable compressed air system ensuring repeatable test conditions
Robust steel chamber structure with excellent vibration and wear resistance
Accessories
(1) VDA standard spray gun
(2) SAE standard spray gun
(3) 3D adjustable sample holder
(4) Electromagnetic vibration feeding system
(5) High-precision angle display device
Test Procedures
Power on the equipment and allow it to preheat to the preset temperature (approximately 15–30 minutes).
Place the prepared sample into the test chamber and securely close the chamber door.
Start the test program; the system automatically controls temperature, pressure release, and aggregate impact.
Monitor temperature and pressure parameters via the control panel to ensure stable operation throughout the test.
Maintenance Information
After testing, remove the sample once the equipment stops automatically.
Record test parameters such as impact cycles, temperature, and pressure for result evaluation.
Clean the test chamber and spray gun tube to remove residual aggregate.
Regularly inspect key components to ensure stable performance for subsequent tests.
在线联系供应商
Other supplier products
 |
UV Test Chamber丨UV Testing Mechine | Features and Benefits 1. STD UV-SI-260 is widely used in UV aging test, which can realize the comprehensive test of UV, temperature, humidity an... |
 |
Battery Constant-Temperature Calorimeter | Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ... |
 |
Scratch tester STD-KK02 | Product introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo... |
 |
Photo fill light box | Standard CE & FCC Certified: Meets electromagnetic compatibility and safety standards for EU/US markets. RoHS Compliant: Lead-free constructi... |
 |
Fiber Blend Ratio Tester | The Fiber Blend Ratio Tester is designed to measure the electrical resistance of a compacted fiber sample and convert it into the specific resistan... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
