Plastic Smoke Density Tester F313，automotive interior smoke tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific optical density of smoke generated during the combustion of plastics. Developed according to GB/T 8323.2-2008. ISO 5659.2-2006. and ASTM E662-2014. it provides accurate data on smoke generation characteristics of materials. The device is widely used in plastics, construction, automotive, and aerospace industries to evaluate fire safety performance and ensure compliance with fire protection requirements.
Application
You can use the F313 Plastic Smoke Density Tester in the following areas:
Plastics industry: Evaluate smoke generation of various plastic materials, especially for fire safety assessment and material selection.
Construction industry: Test smoke density of building materials, including coatings and plastics used indoors.
Automotive industry: Assess smoke generation of interior materials to meet fire safety standards.
Aerospace industry: Conduct fire safety evaluations of aircraft materials and components.
Research institutions: Simulate fire scenarios for fire prevention and firefighting research.
Fire safety product development: Support testing and certification of fire-resistant materials.
Public safety applications: Evaluate safety materials used in airports, train stations, shopping malls, and other public spaces.
Standards
The instrument conforms to the following national and international standards:
(1) GB/T 8323.2-2008 – Plastics – Smoke generation – Part 2: Determination of smoke density using the single-chamber method
(2) ISO 5659.2-2006 – Plastics – Smoke generation – Part 2: Determination of optical density
(3) ASTM E662-2014 – Standard test method for specific optical density of smoke generated by solid materials
(4) BS 6853:1999 – Railway applications – Smoke generation from passenger carriage materials
(5) NFPA 262 – Standard test method for flame and smoke spread
(6) UL 94 – Standard for flammability of plastic materials
(7) ISO 1210 – Determination of thermal stability and flammability of plastics
Parameters
| Parameter | Specification |
|---|---|
| Measurement range | 0.0001–100% smoke density; 0–924 (six automatic ranges) |
| Operating voltage | 200–240 V, 50 Hz |
| Environmental conditions | Room temperature – 40°C, relative humidity ≤85% |
| Heat flux | 50 kW/m² |
| Light source | 6.5 V incandescent lamp, wavelength 400–750 nm |
| Detector | Silicon photodiode, 0–100% transmittance, 0.001% precision |
| Fuel type | Propane ≥95% purity |
| Burner | Igniter and nozzle combination, 10 mm from sample |
| Smoke measurement system | Digital display of optical density |
| Chamber design | Fully open doors for easy loading, cleaning, and side-mounted controller |
| Gas sampling port | Optional, for toxicity testing |
| Chamber coating | Chemically resistant and easy to clean |
Features
(1) High-precision smoke measurement: Advanced photodetector and silicon cell ensure accurate optical density readings.
(2) Automated testing: Minimizes manual intervention, improving efficiency and data reliability.
(3) Standards compatibility: Supports GB, ISO, ASTM, and other international standards.
(4) Versatile applications: Suitable for plastics, construction, automotive, aerospace, and safety testing.
(5) Safety design: Equipped with automatic shut-off to ensure operational safety.
(6) Modular configuration: Optional gas measurement ports and printer for expanded functionality.
(7) Durable and stable: High-quality materials and corrosion-resistant coating ensure long-term reliability.
Accessories
(1) Propane cylinder (≥95% purity, user-supplied)
(2) Smoke sampling tube (1 set)
(3) Silicon photodiode (1)
(4) Light source lamp, 6.5 V (1)
(5) Filter set (1)
(6) Protective door (1)
Test Principles
The F313 Plastic Smoke Density Tester measures smoke optical density by placing a burning plastic sample in a controlled environment. A light source passes through the smoke, and a silicon photodiode detects the transmitted light. The system calculates the specific optical density of the smoke. Maximum optical density is measured to evaluate the smoke-generating characteristics of the plastic material. All measurements strictly comply with GB, ISO, and ASTM standards.
Operation Instructions
Sample preparation: Ensure test samples meet dimensional requirements (100 × 100 mm, thickness ≤50 mm).
Device setup: Connect power and set appropriate parameters, including temperature and gas flow.
Start test: Press the “Start Test” button; the system automatically ignites the sample and collects data.
Safety precautions: Operators should wear protective equipment and ensure adequate ventilation.
Test completion: Data is automatically displayed and can be printed. Clean the chamber to remove residual smoke before turning off the device.
在线联系供应商
Other supplier products
 |
Electric Cables Halogen Acid Gas Release Tester，Cable Halogen Acid Gas Release Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This apparatus is widely used in laboratories and quality control departments ... |
 |
AATCC M6 Washer and Dryer Supplier | Textile Testing Equipment Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Feature (1) Heat Pump Technology: Reduces energy consumption by up to 30% wh... |
 |
Adhesion tensile load test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The hot - tack tensile tester is an instrument specifically designed to test ... |
 |
Chemical Protective Robotic Manikin Clothing Testing Equipment price | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The system consists of a mannequin and an upper body head for testing chemica... |
 |
Battery Isothermal Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Battery Isothermal Calorimeter is a professional instrument developed based on the principl... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
